Panasonic AJ-D250P Operating Instructions Manual

Also see for AJ-D250: Service manual

Panasonic AJ-D250P Operating Instructions Manual Manual pdf 15 page image

15CH3 CH4CH4CH1+CH3 CH2+CH4CH3AUDIO OUT connectorsCH1 output CH2 outputCH1CH2CH3CH4LEDCH1CH1CH2CH1 CH3CH4CH2CH3CH4No display CH3CH4No display CH3CH4No display CH3CH4CH1CH2CH3CH4The AUDIO OUT SELECT button is used to switch to the desired sound.By pressing this button, the audio output is switched to the modes in the sequence shown below.Display tubeCH2• • • • • • • OFF• • • • • • • ONThe settings in the boxes ( ) are valid only during DV format4-channel mode playback.Audio switchingFrame by frame advanceWhen the FF or REW button is pressed during still picture playback, the tape will beadvanced forward or backward one frame at a time.O No sound will be heard during frame by frame advance.REC CHECKBy pressing the REC button during playback or in the STOP or STANDBY OFF mode, it ispossible to check the audio input signals, time code generator value and the video input signalswhich have been selected using the INPUT SELECT switch.O REC CHECK during playbackThe REC CHECK mode is established while the REC button is held down. Normal playbackis restored when the button is released.O REC CHECK in the STOP or STANDBY OFF modeThe REC CHECK mode is established when the REC button is pressed. To release themode, press the STOP button.ModeABCDEFGSequence in which the modes are selected[[.. A >> B >> C >> D >> E >> F >> G ..]]aa"""""""""""""""""""""""""""""""""""""""""""" }}Operation