Panasonic AJ-D250P Operating Instructions Manual

Also see for AJ-D250: Service manual

Panasonic AJ-D250P Operating Instructions Manual Manual pdf 16 page image

161 Set the unit to the menu mode (by setting the LOCAL/MENU/REMOTE switch to theMENU position).O “– –:– –:– –:– –” appears on the display when the points have not been set. In this case,repeat playback will start at the beginning of the tape which serves as the BEGIN point andend at the end of the tape which serves as the END point.O When the MODE button (REW button) is pressed instead of the SET button upon completionof the settings, the time code setting will be canceled.234 Select the digit to be changed (blinking display) using the UP button (FF button) orDOWN button (STOP button).The frame digits cannot be selected. They always appear as “00.”5 The value is incremented or decremented using the DATA+ button (PAUSE/STILLbutton) or DATA– button (PLAY button).6 Press the SET button (REC button) upon completion of the settings.The settings are now stored in the memory.Repeat playbackSetting the BEGIN and END points[Menu mode]7 Set the LOCAL/MENU/REMOTE switch to the LOCAL or REMOTE position.OperationSelect the “BGN PRESET” or “END PRESET” setup menu item, and press theDATA+ button (PAUSE/STILL button) or DATA– button (PLAY button).(See page 29)It is possible to select whether the BEGIN or END point is to be set or not by operatingthe DATA+ or DATA– button.Select TC or CTL using the COUNTER button.If the RESET button is pressed while the unit is in CTL mode, 00:00:00:00 will be set.