Panasonic AJ-PCD30PJ Operating Instructions Manual

Also see for AJ-PCD30PJ: Brochure

Contents

Panasonic AJ-PCD30PJ Operating Instructions Manual Manual pdf 11 page image

11Installation (continue)To Connect the device to a Personal Computer for External Use1 Attach the rubber feet to the dimples on thebase of the device.2 Start the personal computer.3 Plug the AC adaptor supplied with the deviceinto the DC IN 16 V socket on the device.4 Pressing the power button switches on thepower and starts up the device.After startup, the power indicator will light upgreen.5 To be connected by USB 3.0Plug a USB 3.0 cable B connector into theUSB connector on the device, then plug theother end (A connector) of the USB 3.0 cableinto the USB 3.0 port on the personalcomputer.Caution: Even with a USB 3.0 cable, if thedevice is connected to a USB 2.0 port it willoperate as a USB 2.0 device.No USB 3.0 cable is supplied with the devicein the package. Use a commercially availableUSB 3.0 cable (shielded).Take care to use a USB cable that is nolonger than 3 metres. The device may notoperate properly with a cable longer than3 metres.To be connected by USB 2.0Plug a USB 2.0 cable B connector into theUSB connector on the device, then plug theother end (A connector) of the USB 2.0 cableinto the USB 2.0 port on the personalcomputer.No USB 2.0 cable is supplied with the devicein the package. Use a commercially availableUSB 2.0 cable (shielded).Take care to use a USB cable that is nolonger than 3 metres. The device may notoperate properly with a cable longer than3 metres.DimplesUSB 3.0 connectorUSB 3.0 connector