8Parts and their FunctionsFront Panel(1)Power IndicatorThis indicator lights up in green when the P2drive is running.(2)Status IndicatorThis indicator blinks in green during access toa P2 card.Do not remove the P2 card during access ofthe card, otherwise files may be corrupted, orthe P2 card may fail.(3)Card SlotsThe P2 drive’s card slots are designed for P2cards.The P2 drive does not operate with cardsother than P2 cards.(4)EJECT ButtonTo remove a P2 card, press this button so thatthe button pops out, then press it in again.For Macintosh only: To remove a P2 card,drag the icon of the P2 card to “Trash,” andthen press the EJECT button after confirmingthat the P2 card icon disappears.Rear PanelThe picture shows the rear panel with its coverremoved.(1)PCIe interface connectorThis connects a PCI Express cable.Ensure that both the P2 drive and thepersonal computer are switched off whenconnecting the cable.(2)DC IN 16V SocketFor external use of the P2 drive, connect anAC adapter to this socket.For the AJ-PCD35EJ only: For external use ofthe P2 drive, connect the power switch box tothis socket.(3)DC IN 12V SocketTo use the P2 drive mounted in a personalcomputer, connect one of the power supplyconnectors inside the personal computer tothis socket. (See page 14)Do NOT supply power to both the DC IN 12Vsocket and DC IN 16V socket at the sametime.(4)Cable ClampUse this clamp to secure the AC adapter cablewhen connecting the P2 drive to a personalcomputer for external use of the Drive.For the AJ-PCD35EJ only: Use this clamp tosecure the power switch box cable whenconnecting the P2 drive to a personalcomputer for external use of the drive.(5)Antitheft LockA commercially available antitheft cable canbe connected to this lock.(1) (2) (3) (4)(1) (2) (3)(4)(5)DC IN 16V DC IN 12V
