Panasonic AJ-PG50 Operating Instructions Manual

Also see for AJ-PG50: Settings guide Operating instructions

Contents

Panasonic AJ-PG50 Operating Instructions Manual Manual pdf 90 page image

90 Setup Menu: Menu ListREC/PB > REC/PB FUNCTION_ is the factory default setting.*1 3G-SDI LEVEL-A, 3G-SDI LEVEL-B DL, and 1.5G-SDI signals are written as “HD SDI” signals.REC/PBREC/PB FUNCTIONItem Settings and brief function description FREQ indicationsRECORDINGSelects the recording method.NORMAL: Normal recordingLOOP: Loop recordingAUTO RECSelects whether recording and stopping are performed automatically in accordance with therecord and stop signals of the HD SDI*1 and HDMI input signals from a camera-recorder.TYPE1:Recording and stopping is performed automatically in accordance with the record and stopsignals in the LTC information attached to HD SDI signals.TYPE2:Recording and stopping is performed automatically in accordance with the record and stopsignals in the SVITC information attached to HD SDI signals.TYPE3:Set this when using other manufacturer’s camera-recorders.TYPE4:Recording and stopping are performed automatically in accordance with the record andstop signals added to HDMI.OFF:Recording and stopping is not performed automatically.Note:• SD SDI signals are not supported.• When this is set to other than OFF and the status becomes REC PAUSE, “AREC” is dis-played in a superimposed screen.• To start automatic recording, press the [REC] and [PAUSE] buttons simultane-ously to switch the unit to the REC PAUSE state. This function does not work in any stateother than REC PAUSE. Also, the unit switches to the REC PAUSE state after an auto-matic stop.• For the details on devices for which compatibility has been verified, visit the website. (➝“Website URL” page 9)• In normal recording mode, this setting is not available and an automatic stop is not per-formed.REPEAT PLAYSets whether to perform repeat playback during playback.ON: Performs repeat playback. After the last clip is played, playback continues from the be-ginning clip.OFF: Does not perform repeat playback. Stops playback at the end of the last clip.Note:• Repeat playback is not available during TEXT MEMO playback.• If a P2 card is removed during repeat playback, playback is stopped when a clip thatno longer exists is reached.• Even if you insert a P2 card during repeat playback, the additional clips will not beplayed back until you stop repeat playback and then start repeat playback again.SIMUL RECSets whether to record simultaneously to two P2 cards in two microP2 card slots.ON: Performs simultaneous recording.OFF: Simultaneous recording is not performed.59.94Hz 50Hz59.94Hz 50Hz59.94Hz 50Hz59.94Hz 50Hz