Panasonic AJ-RC905P Operating Instructions Manual

Also see for AJ-RC905P: Service manual

Contents

5FeaturesO The camera recorder’s menus can be set directly.For details of the menus, refer to the operatinginstructions accompanying the camera recorder.O The VTR part of the camera recorder can beoperated.O The return signal (1 channel) can be transmittedusing the analog format.O The power is supplied to the camera recorder andthe signals are input and output by a 26-pin multi-cable (maximum length: 100 meters).The amount of power which can be supplied issubject to limitations so consult your dealer whenputting together your system.O The images being shot by the camera recorder canbe transmitted as analog component signals withtheir high image quality intact.Front panel1 POWER switch2 POWER lampThis indicates that the main power is on.3 MONITOR dialThis is used to adjust the level of the signals whichare output from the MONITOR connector.4 Y/VIDEO dialThis is used to adjust the level of the signals whichare output from the Y/VIDEO connector.5 PR dialThis is used to adjust the level of the signals whichare output from the PR connector.6 PB dialThis is used to adjust the level of the signals whichare output from the PB connector.7 CHROMA (MONITOR) dialThis is used to adjust the frequency response of thesignals which are output from the MONITORconnector.8 CHROMA (Y/VIDEO) dialThis is used to adjust the frequency response of thesignals which are output from the Y/VIDEOconnector.When the Y signal is output, set the dial to itscenter position.Parts and their functionsMONITOR CABLE LENGTHSET UP(PUSH) POS2POS1POS3POS4 PRSTPOS5SVSS POS6REW FF STOP PLAY CALLTALLYREC CHK START/STOPGAINGAINGAIN FILTERBLACKR BPAINTINGENABLEAUTO IRISCHECKM.PEDKNEE SLOPEGAMMADETAILKNEE POINTIRISSHUTTERWHITEBAL ABBABAUTO KNEEAWBVTR WARNINGBARVTRENABLE100m 50mCHROMAY/VIDEOPRPBPOWERPGMRCU CAMERAINTERCOM MICBBSPUSHCHROMAOFFOFFONONOFFON12654837