Panasonic AJ-SD93 Operating Instructions Manual

– 21 –No./Item Description008DISPLAY SELThis selects what information is tobe provided by the time code andother super displays output to theVIDEO MON connector.0000 TIME : Data only.(The data indicates the value forwhichever of CTL, TC or UBcurrently selected by the COUNTERbutton.)0001 T&STA :Data and operation status.0002 T&S&M :Data, operation status and mode.0003 T&RT : Data and REC TIME0004 T&YMD :Data and REC DATE(year/month/day)0005 T&MDY :Data and REC DATE(month/day/year)0006 T&DMY :Data and REC DATE(day/month/year)0007 T&UB :Data and user bit.However, when UB has beenselected with the COUNTER button,the time code is displayed after theuser bit.0008 T&CTL :Data and CTL data.However, when CTL has beenselected with the COUNTER button,the time code is displayed after theCTL data.0009 T&T :The data and time code recorded inthe VAUX area are displayed.0010 VITC:The time code and user bit recordedin the VAUX area are displayed.Notes:• Mode display:DVCPRO 50 (50 Mbps) =DVCPRO_50,DVCPRO (25 Mbps) = DVCPRO,DV = DV, DVCAM = DVCAM• An error message appears if awarning or error has occurred when“T&S&M” has been selected as thissetting.• REC TIME and REC DATE aredisplayed during DV/DVCAM, playbackonly. With the DVCPRO50 (50 Mbps) orDVCPRO (25 Mbps) format, theoperating mode is displayed.No./Item Description001LOCAL ENAThis selects the buttons which canbe operated on the front panel whenthe CONTROL switch has been setto REMOTE.0000 DIS :No buttons can be operated.0001 ST&EJ :Only the STOP and EJECT buttonscan be operated.0002 ENA :All buttons can be operated.002TAPE TIMERThis selects the 12 or 24 hour displayfor the CTL counter.0000 ±12h : 12 hour display0001 24h : 24 hour display003REMAIN SELThis selects whether the remainingtape time and total tape length areto be displayed in thesuperimposed display of the VIDEOMON connector signals.0000 OFF: No display.0001 2L :The remaining tape time isdisplayed on the second line.0002 1L :The remaining tape time isdisplayed on the first line.0003 R/TTL :The remaining tape time isdisplayed on the first line, and thetotal tape length is displayed in thesecond line.Notes:• When “2L” is selected, the remainingtape time is not displayed if “TIME” or“VITC” has been selected as thesetup menu item No.008 (DISPLAYSEL) setting.• When “R/TTL” is selected, the totaltape length is not displayed if “TIME”or “VITC” has been selected as thesetup menu item No.008 (DISPLAYSEL) setting.Setup menus (continued)USER menu The underlined items indicates the initial setting.