–31–Setup menus (continued)The underlined items indicates the initial setting.USER menu No./ItemDescription722REC CH1This selects the input signal to berecorded on the audio CH1 track.0000CH1 :Audio input CH1 signal.0001CH2 :Audio input CH2 signal.0002CH1+2 :Mixed audio input CH1 and CH2signal.723REC CH2This selects the input signal to berecorded on the audio CH2 track.0000CH1 :Audio input CH1 signal.0001CH2 :Audio input CH2 signal.0002CH1+2 :Mixed audio input CH1 and CH2signal.724REC CH3This selects the input signal to berecorded on the audio CH3 track.0000CH3 :Audio input CH3 signal.0001CH4 :Audio input CH4 signal.0002CH3+4 :Mixed audio input CH3 and CH4signal.725REC CH4This selects the input signal to berecorded on the audio CH4 track.0000CH3 :Audio input CH3 signal.0001CH4 :Audio input CH4 signal.0002CH3+4 :Mixed audio input CH3 and CH4signal.No./ItemDescription727PB FADEThis selects the processing method forthe audio edit points (IN point, OUTpoint) during playback.0000AUTO :According to the status duringrecording.0001CUT :Forced CUT0002FADE :Forced FADE728EMBEDDEDAUDThis selects whether to superimposethe audio data onto the SDI output.0000OFF :Data is not superimposed.0001ON :Data is superimposed.734MONI SELINHThis selects whether the operationof the MONITOR SELECT button onthe front panel is to be enabled ordisabled.0000OFF :Operation is enabled.0001ON :Operation is disabled.0002ON1 :Operation is disabled in the FULLdisplay mode and enabled only inthe FINE display mode.750DV PB ATTThis selects the audio output levelduring DV playback.0000OFF :Theaudiooutputlevelisnotattenuated.0001ON :The audio output level is attenuated(reduced).751REC PTMUTEThis selects whether to mute thesound where recordings are joinedduring DV/DVCAM0000OFF :The sound is not muted.0001ON :The sound is muted.YA93PYA94GYA93PYA94GYA93PYA94GYA93PYA94GYA94GYA94GThis appears only when the optional boardAJ-YA93P has been installed.This appears only when the optional boardAJ-YA94G has been installed.YA93P