Panasonic AJ-SD93 Operating Instructions Manual

– 34 –Setup menus (continued)The underlined items indicates the initial setting.USER menu No./Item DescriptionA00LOADThis selects the user file whosecontents will be loaded into USER1.0000 USER2 :The USER2 file contents areloaded.0001 USER3 :The USER3 file contents areloaded.0002 USER4 :The USER4 file contents areloaded.0003 USER5 :The USER5 file contents areloaded.Note:Pressing the MENU button after loadingdisplays a confirmation screen. Pressingthe PLAY button stores the settingvalues. The setting values are notchanged if the STOP button is pressed.A01SAVEThis selects the user file into whichthe USER1 settings will be saved.0000 USER2 :The settings are saved in USER2.0001 USER3 :The settings are saved in USER3.0002 USER4 :The settings are saved in USER4.0003 USER5 :The settings are saved in USER5.0004 LOCKED :This display appears when all theuser files are in the change prohibitstatus.Notes:• User files whose status have beenset to change prohibit cannot beselected.• When all the user files are in thechange prohibit status, the“LOCKED” display appears and thecontents cannot be saved.No./Item DescriptionA02P. ON LOADThis loads the contents of theselected user file into USER1 and itstarts operation with the USER1settings when the power is turnedon.0000 OFF :Operation is started with thesettings of the previously set userfile.0001 USER2 :The contents of USER2 are loadedinto USER1 and operation is startedwith the USER1 settings.0002 USER3 :The contents of USER3 are loadedinto USER1 and operation is startedwith the USER1 settings.0003 USER4 :The contents of USER4 are loadedinto USER1 and operation is startedwith the USER1 settings.0004 USER5 :The contents of USER5 are loadedinto USER1 and operation is startedwith the USER1 settings.A03MENU LOCKThis selects whether to set orrelease the user file (USER2 –USER5) lock mode.0000 OFF :The lock is released (changes canbe made).0001 ON :The lock is set (changes areprohibited).Note:The lock cannot be set for USER1.Notes:• No. A00 (LOAD), No. A01 (SAVE) and No. A02 (P. ONLOAD) are the menu items which can be set only forUSER1.They are not displayed with the USER2 – USER5 files.• No. A03 (MENU LOCK) is the menu item which can beset only for the USER2 – USER5 files.It is not displayed with USER1.A04PF1 ASSIGNThe setup menu item is stored tothe PF1 button.A05PF2 ASSIGNThe setup menu item is stored tothe PF2 button.A06PF3 ASSIGNThe setup menu item is stored tothe PF3 button.