11188-6-6 TC/UB8-6-7 UMID SET/INFOPlease refer to [4-5-6 Setting the UMID Information] for theUMID information setting.The ____ in the Adjustable Range column indicates the presetmode.Items/Data SavedAdjustableRange RemarksUB MODE USERTIMEDATEEXTTCGFRM RATEREGENSelect the user bits mode.USER:Select UB value set in the LCDsection.TIME: Select local time (hours, minutes,seconds).DATE: Select local date and time (2 lastdigits of year, month, date, time).EXT: Slaved to UB from TC-IN. If readingfails, USER value is retained.TCG: TCG value enters UB.FRM RATE:Select same camera shotinginformation (frame rate, etc.) with theVAUX UB (VITC UB).REGEN:Read out value stored in the cardand record value continuously.– C U F –VITC UB MODE USER/EXTTIMEDATETCGFRM RATEREGENSelect the user bits mode for VAUX TC(VITC).USER/EXT:If UB MODE is set to EXT, the EXTvalue is recorded. If not, USER valueset by UB is recorded.TIME: Select local time (hours, minutes,seconds).DATE: Select local date and time (2 lastdigits of year, month, date, time).TCG: TCG value enters UB.FRM RATE:Select same camera shotinginformation (frame rate, etc.) with theVAUX UB (VITC UB).REGEN:Read out value stored in card andrecord value continuously.– C U F –TCG SET HOLD ONOFFON/OFF switching for the feature thatalways starts recording (when the power isturned ON again) the TCG value that wasset before the power is turned OFF.– C U F –FIRST REC TC REGENPRESETFor the first recording after the power isturned on, a P2 card is inserted and thenswitching from this P2 card to anotherrecording-target P2 card is performed,select whether or not to regenerate the timecode as the value on the new P2 card.REGEN:For clips recorded on the recording-target P2 card, regenerate the timecode as the time code of the clip thathas the most recent date and time.PRESET:Use the camera-recorder’s internaltime code.Set the date and time accurately. Forguidance on setting, see [4-5-2 Setting theInternal Clock’s Date and Time].– C U F –P.OFF LCDDISPLAYONOFFSelect whether or not to display the timecode setting and counter indication on theLCD monitor when the power is turned OFF.ON: Display setting and indication whilethe power is turned OFF.OFF: Power-down LCD monitor whilecamera power is turned OFF. Settingand indication disabled.– C U F –Items/Data SavedAdjustableRange RemarksTC OUT TCGTCG/TCRSelect the time code to be output to the timecode output connector.TCG: Always output time code generatorvalue.TCG/TCR:Display time code generator value inE-E mode, and time code readervalue in V-V mode.– C U F –Items/Data SavedAdjustableRange RemarksCOUNTRY NO-INFO Input the user’s country. NO-INFO isdisplayed until the input completes.– C U F –ORGANIZATION NO-INFO Input the user’s organisation or companyname. NO-INFO is displayed until the inputcompletes.– C U F –USER NO-INFO Input the user name. NO-INFO is displayeduntil the input completes.– C U F –DEVICE NODE Indicate the product ID number.– – – – –
