102 Using Play List: Creating New Clips From the Play List (Edit Copy)Creating New Clips From the Play List (Edit Copy)You can use the play list to create a new clip.This function is called edit copy.◆ NOTE:• The playback time code setting allows you to start the time codefrom a set value after edit copy. Set the playback time code asnecessary.➝ For details, refer to “Setting the Playback Time Code (TC)” (page100).• Play list files created on the AJ-SPD850 can be loaded but notedited. However, edit copy becomes available after saving the fileunder another name using SAVE AS.1 Open the play list screen.2 Press the MENU button.3 Use the cursor buttons to choose [OPERATION] –[EDIT COPY].4 Select the number of the P2 card slot that will storethe edit copy data and press the SET button.5 Select [YES] and press the SET button.This starts edit copy.◆ NOTE:• If total free space on an inserted P2 card is not sufficient to storeedit copy data, the message “WARNING: LACK OF RECCAPACITY!” appears and edit copy does not start.• Edit copying indicates its approximate progress duringoperation.• Use the SET button or the CANCEL button to cancel an ongoingedit copy operation.• Text memos are automatically inserted at the edit points (thestart of each event) of edit-copied clips.• Edit copying does not copy any information other than the userclip name.• The presence of different aspect ratios in the data will generatean error.• Edit copy will copy only events that can be played back.• Do not remove a P2 card that is being accessed (the LED of therelated P2 card slot flashes).• When the specified card does not have enough space to storeall the data, the remaining data is automatically copied to a P2card in the next number slot. The number of the slots where thedata is copied is displayed during copying or when copyingends.
