Using Play List: Play List Function 67Using Play ListUsing Play ListPlay List FunctionThe play list function allows you to create lists (play lists) thatregister clip sections recorded on P2 cards to continuouslyplay them back in list order. List editing is fast and efficientsince no actual data is involved.In normal playback, playback starts from the starting pointand goes on until the last clip.In a play list playback, the user first creates a play list thatdefines the IN points (start position) and OUT points (endposition) of the clip segments that should be played. Thesubsequent play list playback will play only the sectionsspecified on the play list as a single continuous section.◆ NOTE:• The play list function is accessed by opening the play list screen(press the PLAY LIST button to turn it on).• The play list is stored in the play list area of memory in this unit andcan always be accessed from the play list screen. Play list can alsobe stored on a P2 card. To save the voice-over audio data to thesame P2 card as the play list, first save the play list to a P2 card.• The processing activities entered on each line in the play list screento run the play list are called events.• During play list playback, only formats set as edit formats can beplayed and registered.• Do not add a 24PN clip created in non-linear editing to a play list.Editing points may not be registered correctly.• The play list stores the playback volume set during audio overwritingand uses this volume setting during playback. For this reason, thesound volume cannot be adjusted during play list playback.• Do not use and register multiple copies of a clip at the same timesince that may result in incorrect recognition.Current position Continuous playbackContinuous playbackClip 1 Clip 2 Clip 3-1Clip 3-2 Clip 4 Clip 5P2card 1P2card 2Clip 1 Clip 2 Clip 3-1Clip 3-2 Clip 4 Clip 5Play list playbackContinuously played as specifiedby the play list (When started from event A)P2card 1P2card 2IN OUT IN OUTIN OUTEvent CEvent CEvent BEvent AEvent BEvent A
