Setup: Item Settings 125SetupThis menu allows you to set method for engaging search dial operations, maximum shuttle speed operation, maximum speedof FF and REW operation, NEXT and PREV seek operations, display of warning messages when REF.VIDEO is not connected,PLAY delay time, battery type, display of warnings when power is too low, voltage when the power supply is turned off.* An underlined setting indicates an initial value.OPERATIONItem SettingSettings and brief function descriptionFRNo.SUPERDISP.FRNo.SUPERDISP.100 SEARCH ENA00000001DIALKEYSpecifies method for transferring to the search mode (search dial operation).0: Press the STILL button or turn the search dial to engage search dial operation.1: Press the STILL button to engage search dial operation.101 SHTL MAX00000001000200030004×8×16×32×60×100Sets the maximum shuttle speed operation.0: 8× normal speed1: 16× normal speed2: 32× normal speed3: 60× normal speed4: 100× normal speed102 FF.REW MAX0000000100020003×32×60×100SEEKSets the maximum speed of FF and REW operation.0: 32× normal speed1: 60× normal speed2: 100× normal speed3: Seek operation to start of clipNOTE:• When SEEK is selected, FF and REW operations for FF and REW commandstransferred via 9P and 1394 are performed at 100× normal speed.• The seek operation is available in playback mode.103 SEEK SEL00000001CLIPCLIP&TSpecifies where a NEXT (SHIFT+FF) and PREV (SHIFT+REW) seek operation moves to.0: The start of the clip1: The start of the clip or video text memoNOTE:This setting is not available during FF and REW operation.104 REF ALARM00000001OFFONSelects whether or not a warning should appear when REF.VIDEO is not connected.0: Displays no warning1: Flashes the STOP lamp to warn108 PLAY DELAY0000|00150|15Sets PLAY delay time in frame increments.122 STOP EE SEL00000001EEPBSpecifies whether to invoke the EE mode or playback mode when STOP is pressed.0: EE mode1: Playback modeNOTE:During IEEE1394 signal input, the EE mode is invoked regardless of this menu setting.
