Panasonic AK-HC3500P Operating Instructions Manual

Also see for AK-HC3500P: Operating instructions

24Checking and setting the calendarThe calendar is checked and set on the [Date/Time] page located on the Maintenance menu. Checking the current settings1. Check the current year/month/day, day of the week and time displayed on [Present].2. Select [Adjust], press the jog dial, and when [YES?] is selected and entered, the seconds are reset to “00.” Adjusting the time1. At [12H/24H], select whether the 12-hour or 24-hour system is going to be used.2. At [Date], set the year, month, day and day of the week.3. At [Time], set the hours, minutes and seconds.4. At [Set Exe], when [YES?] is selected and entered, the adjusted year/month/day, day of the week and time are displayedin [Present].5. At [Reset], when [YES?] is selected and entered, the following is displayed:00/01/01 MON00:00:00 The calendar function will not operate properly when an irregular year/month/day, day of the week or time is set. The manufacturer disclaims all responsibility for any trouble which may be caused by the calendar function.NotesCamera warning displaysWarning displays appear when errors have occurred in the camera’s auto functions.Set [Status (AUTO)] to ON at [VF Display2] under [Operation]. When AWB is executed: AWB LOW LIGHT Auto white balance cannot be executed because the light quantity is insufficient.Set the light quantity to the appropriate level. AWB HIGH LIGHT Auto white balance cannot be executed because the light quantity is excessive.Set the light quantity to the appropriate level. AWB R/Bch NG Out Range The white balance convergence for the red or blue channel cannot be achieved.Shoot a uniformly white object on the screen, and execute AWB. When ABB is executed: Not Finished Auto black balance cannot be completed successfully.The lens iris may not be open or the ND filter may not be set to CAP. R/B Out Range The black balance convergence for the red or blue channel cannot be achieved.Check whether there are any abnormalities in the image. When ASU is executed: LENS CTL NG Out Range The lens iris cannot be controlled.Review the lens settings. --- R/Bch NGTrouble has occurred in the red or blue channel in the process which is beingexecuted.Using a regular chart, check the correct position vis-à-vis the chart and angle ofview, check the color temperature setting of the light source, and check whetherany other areas are not amenable to control.