10Featureszz HD and SD format simultaneous operation possibleAs a standard feature, the unit incorporates not only HD video signaloutputs but SD video signal outputs (SDI and analog composite).zz BAR ID displayCharacters can be displayed on the color bar signals so as to identifythe output source of the images, and then output.zz PrompterAs a standard feature, the unit incorporates prompter input (analogcomposite)zz Support for memory cardsThe upgrade software and unit’s setting data can be saved to amemory card.AccessoriesCheck the accessories.zz After unpacking the product, dispose of the packaging material appropriately.CD-ROM .................................................................................................. 1z Operating Instructions z Operating Instructions Power cablefor AK-HCU200P / AK-HCU200PS ........................................................ 1for AK-HCU200E / AK-HCU200ES ........................................................ 2Precautions for useObserve the following in addition to the information included in “Read this first!”.Handle carefullyDo not drop the product or subject it to a strong impact.Doing so may cause a failure or accident.Avoid using the unit outdoorsUse the product in an ambient temperature of 0 °C to 40 °C(32 °F to 104 °F)Avoid using the product in a cold place where the temperature dropsbelow 0 °C (32 °F) or in a hot place where the temperature rises above40 °C (104 °F) because an extremely low or high temperature willadversely affect the internal parts.Turn off the power before connecting or disconnectingcablesBefore connecting or disconnecting the cables, be sure to turn the poweroff.Avoid humidity and dustAvoid using the product in a very humid or dusty place because a lot ofhumidity and dust will cause damage to the internal parts.CleaningTurn the power off and wipe the product with a dry cloth.To remove stubborn dirt, dip a cloth into a diluted solution of kitchendetergent (neutral detergent), wring it out well, and wipe the productgently. Then, wipe the product with a cloth dampened with water. Finally,wipe the product with a dry cloth.zz Avoid using benzine, paint thinners and other volatile fluids.zz If a chemical cleaning cloth is to be used, carefully read throughthe precautions for its use.NoteOptical fiber multi cableWhen the optical fiber connectors of the optical fiber multi cable (soldseparately) become dirty, the optical signal transmission state willdeteriorate.Use commercially available optical connector cleaner to clean the opticalend faces in accordance with the instructions.Disposal of the unitWhen the unit has reached the end of its service life and is to bedisposed of, ask a qualified contractor to dispose of the unit properly inorder to protect the environment.