Panasonic AK-HCU200P Operating Instructions Manual

Also see for AK-HCU200E: Operating instructions

Contents

Panasonic AK-HCU200P Operating Instructions Manual Manual pdf 19 page image

19SpecificationsPower supply:100 V to 240 V AC, 50/60 HzPower consumption:170 W(Without CAMERA connected: 32 W)Capacity for supplying power to a camera:190 V DC, 0.6 Aindicates safety information.Operating temperature:0 °C to 40 °C (32 °F to 104 °F)Humidity:10 % to 90 % (no condensation)Dimensions (Width × Height × Depth):424 mm × 88 mm × 400 mm(16-11/16 inches × 3-7/16 inches × 15-3/4 inches)[Excluding protrusions]Weight:Approx. 6.6 kg (14.6 lb)Video output:HD-SDI/SD-SDI4 lines (2 lines shared with picture monitor output *2)Analog composite1 line (1 line shared with picture monitor output *2)Return input:HD-SDI/SD-SDI (switched depending on the setting)2 linesVBS1 linePrompter input:Analog composite1 lineReference input:Black burst/tri-level *11 line (1 loop-through line)Microphone output:0 dBm/600 Ω2 lines (XLR, 3-pin, male)Intercom:Input: –55 dBu to –10 dBuOutput: 100 mW (max.)(XLR, 5-pin, female)COMMUNICATION:Intercom input/output:(0 dBm, 600 Ω, RTS/4W *2)2 lines (1/2 *2)PGM input (0 dBm/600 Ω)1 lineTally input (red, green)1 input eachROP interface:RS-4221 line, 12 V outputMSU interface:RS-4221 line, GPI for controlLAN port:For computer connection1 line (10Base-T/100Base-TX, RJ45, crossover cable,category 5 or above)*1: The black burst signal and tri-level sync signal of the reference inputare recognized automatically.*2: Depending on the setting, only one of them can be selected at onetime.For details on the maximum lengths of connection cables, consultyour dealer.NoteInrush current, measured according to European standard EN55103-1,on initial switch-on: 7 A, after a supply interruption of 5 s: 11 A

/ 20

Related manuals for Panasonic AK-HCU200E