99. Specifications and standard accessoriesSpecificationsInputs 8 video input lines (maximum)4 standard video input lines:SDI inputs ×4Maximum of an additional 4 video input lines as options:SDI inputs ×, analog (HD/SD) inputs ×, DVI inputs ×Up to two circuit boards from among the various optional input boards(incorporating two up-converter lines) can be additionally connected.Reference 1Outputs 7 video signal lines (maximum)3 standard video output lines (SDI):PGM outputs ×, OUTPUT1 output ×1, OUTPUT output ×1Maximum of an additional 4 video output lines as options:OUTPUT3 to 6 ×1 outputUp to two circuit boards from among the analog (HD/SD) ×, DVI ×1 and analog ×1output boards can be additionally connected. PGM, PVW, AUX, MULTI and KEYOUT can be assigned to OUTPUT1 to 6.Reference 1Signal formats SD: 480/59.94i, 576/50iHD: 1080/59.94i, 1080/50i, 70/59.94p, 70/50pSignal processing Y:Cb:Cr 4: : , 10 bitRGB 4:4:4, 8 bitME number 1MESDI inputs HD: Serial digital (SMPTE 9M)SD: Component digital (SMPTE 59M)BNC connector, IN1 to 8 (with active through) IN5 to 8 are optional inputs.HD [SMPTE 9M (BTA S-004B) standard complied with]• 0.8 Vp-p 10 % (75 )• Input return loss More than 15 dB (5 MHz to 750 MHz)More than 10 dB (750 MHz to 1.5 GHz)• Automatic equalizer 100 m (when 5C-FB cable is used)SD [SMPTE 59M standard complied with]• 0.8 Vp-p 10 % (75 )• Input return loss More than 15 dB (5 MHz to 70 MHz)• Automatic equalizer 00 m (when 5C-V cable is used)SDI outputs HD: Serial digital (SMPTE 9M)SD: Component digital (SMPTE 59M)BNC connector, PGM 1 ( output), OUTPUT HD [SMPTE 9M (BTA S-004B) standard complied with]• Output return loss More than 15 dB (5 MHz to 750 MHz)More than 10 dB (750 MHz to 1.5 GHz)• Output level 0.8 Vp-p 10 % (75 )• Rise time Less than 70 ps• Fall time Less than 70 ps• Difference between rise time and fall timeLess than 100 ps• Alignment jitter Less than 0. UI (130 ps)• Timing jitter Less than 1.0 UI• Eye aperture ratio More than 90 %• DC offset 0 0.5 V