Cable Compensator AW-RC40035 (E)IntroductionAccessories≥ The AW-RC400 is capable of providing cablecompensation for analogue composite, analogue Y/C oranalogue component signals in five channels up to 500meters (when the 5C-2V connecting cable or itsequivalent is used).≥ It features a 5us advance function for the sync signals inorder to provide easy support for a system (another cablecompensator is required) in which the coaxial cableconnected between this AW-RC400 cable compensatorand the camera is longer than 500 meters.NOTE≥ Input either sync signals to the sync signal inputconnector on the AW-RC400 cable compensator orinput video signals to one of the video channels (inputcomposite signals or Y signals with sync to video inputconnector 1). If neither of these signals is input, themonitor selection will not be controlled.≥ The AW-RC400 provides cable compensation for thethree Y, Pr and Pb signal channels by means of asingle control. This means that the Y, Pr and Pb signalscannot be adjusted separately. In the same way, the Yand C signals cannot be adjusted separately.≥ The AW-RC400 is a cable compensator and, as such,it does not come with signal conversion functions (forconverting component signals into composite signals,for instance).≥ When the cable compensator is to be discarded at theend of its service life, ask a specialized contractor todispose of it properly in order to protect theenvironment.Rack-mounting adaptors ............................................................. 2Mounting screws (M4!8 mm) .................................................... 4
