Panasonic AW-RC400N Operating Instructions Manual

Panasonic AW-RC400N Operating Instructions Manual Manual pdf 22 page image

Pan/Tilt Control Panel AW-RP40022IntroductionAccessories≥ This pan/tilt control panel enables up to five AW-PH400indoor pan/tilt heads to be controlled.≥ By connecting the AW-CB400 remote operation panel orWV-CB700A remote control box to the control panel, theconvertible cameras mounted on the pan/tilt heads can becontrolled at the same time.≥ By installing an additional control panel, two of the fiveunits in the pan/tilt head system can be controlled at thesame time.≥ Up to ten tracing memories can be accommodated.≥ Up to 50 preset memories can be set.≥ The connection distance between the control panel andpan/tilt head system can be extended up to a maximum of500 meters.NOTE≥ The AW-RP400 cannot be used to control the modelAW-PH300, AW-PH300A, AW-PH350, AW-PH500 orAW-PH600 pan/tilt heads.≥ Before using the control panel, the movement range(limiters) of the pan/tilt head system must be setwithout fail.≥ When the AW-RP400 control panel is to be discardedat the end of its service life, ask a specializedcontractor to dispose of it properly in order to protectthe environment.Zoom switch ................................................................................. 1Plug (D-SUB 15-pin) for tally/INCOM system ...................... 1 setRack-mounting adaptors ............................................................. 2Mounting screws (M4!8 mm) .................................................... 4