Panasonic BB-HNP17A Operating Instructions Manual

Also see for BB-HNP17A: Product catalog Hardware

Contents

Panasonic BB-HNP17A Operating Instructions Manual Manual pdf 77 page image

• If settings related to images (e.g., resolution) in the setting screen of a WV series network camerasand some BL series network cameras are changed during recording, communications with the softwarewill be blocked and the recording image will be temporarily interrupted.2.5.3 Motion Detection RecordingMotion detection recording starts when the [Threshold] value is exceeded. Set the [Threshold] value for eachcamera. (® Page 33)Motion detection recording can only be set up for cameras that connect in JPEG format. If the MPEG-4/H.264format is selected, change the format to JPEG. (® Page 28)1. From the multi-monitoring window, select a camera for motion detection recording.• A green frame is displayed around the selected camera.2. Click and select [Start Motion Detection Recording] from the menu displayed.• Starts motion detection recording by the selected camera.• To stop recording from a camera, select the camera, click , and select [Stop Motion DetectionRecording] from the menu which is displayed.Note• Recording will not stop even if you close the operating window with .When is displayed in the notification area, the recording software is running. (® Page 10)• The motion detection level you have set may not be sufficient for motion detection recording dependingon the resolution, image quality, the recording subject, and network environment.To ensure proper operation, test the motion detection recording on the motion detection monitoringwindow (® Page 33) and adjust the motion detection level as necessary.• Motion detection commands can be selected and executed. (® Page 32)• Recording can be performed for a specified number of seconds before or after motion is detected.(® Page 32)• When motion is detected just after the start time or just before the end time specified in the timerrecording settings, the recording time may be shortened. Recording may also be shortened whenmotion is detected just after motion detection is started or just before motion detection is stoppedmanually.Example: You have set images to be recorded 5 seconds before and after motion detection. If 1 secondbefore motion detection, motion detection recording starts, and then finishes 2 seconds after motiondetection, images from the first 4 seconds before motion detection and the last 3 seconds after motiondetection are not recorded.5 sec. 5 sec.motion is detectedmotion detection recording startsnot recorded not recordedmotion detection recording finishes5 sec. 5 sec.motion is detectedOperating Instructions 772.5.3 Motion Detection Recording