Panasonic BB-HNP17A Operating Instructions Manual

Also see for BB-HNP17A: Product catalog Hardware

Contents

Panasonic BB-HNP17A Operating Instructions Manual Manual pdf 79 page image

• Some of the alarm setting specifications for WV series network cameras and some BL series networkcameras differ to other cameras. See Page 162 for more information.2.5.5 Sensor Detection RecordingWhen the signal of a sensor that is attached to the camera is detected, sensor recording starts. Set the sensordetection method for individual cameras (® Page 38).Sensor recording only operates when the JPEG format is selected. If the MPEG-4 format is selected, changethe format to JPEG (®Page 28).1. From the multi-monitoring window, select a camera for sensor detection recording.• A green frame is displayed around the selected camera.2. Click and select [Start Sensor Detection Recording] from the menu displayed.• Starts sensor detection recording by the selected camera.• To stop recording from a camera, select the camera, click , and select [Stop Sensor DetectionRecording] from the menu which is displayed.Note• Recording will not stop even if you close the operating window with .When is displayed in the notification area, the recording software is running. (® Page 10)• You can set the camera to record a certain number of seconds before and after a sensor signal isdetected. The detection method that you have set may not be sufficient for sensor detection recordingdepending on the resolution, image quality, the recording subject, and network environment. To ensureproper operation, test the sensor recording.• Sensor detection commands can be selected and executed. (® Page 38)• If after-sensor detection recording and before-sensor detection recording overlap, a continuous imageis recorded.Example: You have set images to be recorded 5 seconds before and after sensor detection.5 sec. 5 sec.5 sec. 5 sec.Sensor signalis detectedSensor signalis detected1 image is recorded.• Detection notifications and images captured at detections can be sent to specified E-mail addresses.(® Page 19)• Some of the alarm setting specifications for WV series network cameras and some BL series networkcameras differ to other cameras. See Page 162 for more information.2.5.6 Sound Detection RecordingSound detection recording will begin when a sound is detected by the camera.Set the recording time for sound detection recording for each camera. (® Page 40)Sound detection recording can only be set up for cameras that connect in JPEG format.If the MPEG-4/H.264 format is selected, change the format to JPEG. (® Page 28)1. From the multi-monitoring window, select a camera for sound detection recording.• A green frame is displayed around the selected camera.Operating Instructions 792.5.6 Sound Detection Recording