Panasonic BL-C111A - Network Camera - Pan Service Manual

Also see for BL C131A - Network Camera - Pan: Operating instructions Installation guide Setup guide Operating instructions Integration notes

Panasonic BL-C111A - Network Camera - Pan Service Manual Manual pdf 22 page image

22BL-C111A /BL-C131A7.3. Setup Guide1. Insert the included CD-ROM into your PC.• The Setup Program starts. If the program does not start, double-click Setup.exe foundon the CD-ROM.2. Click [Search for Cameras].• The program searches for cameras connected to your network.3. When the Windows Security Alert is displayed, click[Unblock].• If the dialog is not displayed, continue to the next step.4. Select the camera you want to configure, and click[Access Camera].• To assign all network settings to the camera manually, or to assign an IP address usingthe DHCP feature of your router, click [Network Settings], then select [Specify an IPAddress] or [DHCP] and enter the appropriate settings.5. Enter the desired user name and password, then click[Save].• Do not forget the user name and password you set here, otherwise you will need toreset the camera and configure it again.6. Enter the user name and password, then click [OK].7. For BL-C131A Only:Click [Next] to configure the camera’s wirelesssettings, enter the wireless settings, then click [Save].• BL-C111A users can skip this step.• BL-C131A users can skip this step by selecting [Disable] and then clicking [Next].Wireless settings will not be configured.• [About this program]: Displays the program’s versioninformation.• [Search for Cameras]: Displays a list of camerasconnected to your network.• [Manual]: Allows you to view the includeddocumentation. PDF versions of the printeddocumentation are included on the CD-ROM; Adobe ®Reader® is required to view them.• [Update Firmware]: Allows you to use the SetupProgram to update the camera’s firmware (built-insoftware).• [Save Settings to PC/Save Settings to Camera]:Allows you to save a backup of all camera settings onyour PC, or restore all settings in the camera using abackup file saved on your PC.• [Network Camera Recorder Single Camera VersionInstallation]: Installs the [Network Camera RecorderSingle Camera Version] software. (See “Installing theNetwork Camera Recorder Single Camera Version” onpage 2.)• [Exit]: Closes the screen and exits the Setup Program.• If you have more than one camera, you candistinguish cameras by model number,printed on the front of the camera, or byMAC address (see “Camera Diagrams” onpage 2 in the Installation Guide to find yourcamera’s MAC address label).• If more than 20 minutes have passed sincethe selected camera was turned on, youcannot configure the camera. Turn off thecamera, then turn it on again. Thisrestriction does not apply to cameras whichhave not been configured yet or have beenreset to their factory default settings.• If you are using firewall or antivirus software on your PC, the Setup Program may notbe able to find any cameras on your network. If you cannot disable your firewall orantivirus software, you can configure the camera by entering its MAC address (see“Camera Diagrams” on page 2 in the Installation Guide to find your camera’s MACaddress label).An authentication dialog prompts you toenter the user name and password again.• Configure the camera for wirelessaccess by configuring thecorresponding camera settings tomatch the wireless settings of yourwireless router. For more information,refer to the operating instructionsincluded with your wireless router, andto 5.2.1 Configuring the Camera forWireless Connection (BL-C131A Only)in the Operating Instructions on the CD-ROM.• If you have a Panasonic BB-HGW700ANetwork Camera Control Unit, WEPsettings will be configuredautomatically. WPA-PSK (TKIP) andWPA2-PSK (AES) settings must beentered manually.