Panasonic BL-C30A Installation/troubleshooting Manual

Also see for BL-C30A - Wireless 802.11 b/g Network Camera: Operating instructions Getting started Installation and troubleshooting instructions

Contents

Panasonic BL-C30A Installation/troubleshooting Manual Manual pdf 26 page image

Installation/Troubleshooting26Troubleshooting2.6 About Pyroelectric Infrared SensorProblem Cause and RemedyPyroelectricinfrared sensordoes not work.• You have not enabled the pyroelectric infrared sensor.Enable the pyroelectric infrared sensor image buffer/transfer(see page 64 of the Operating Instructions in the Setup CD-ROM).• Pyroelectric infrared sensor stops during privacy mode.Pyroelectric infrared sensor stops during privacy mode.Disable the privacy mode (see page 77 of the OperatingInstructions in the Setup CD-ROM).• The pyroelectric infrared sensor is obstructed.Even if the obstacle is made of glass or acrylic plastic, itaffects the pyroelectric infrared sensor performance.Remove the obstacle in front of the sensor.• The pyroelectric infrared sensor does not detect a temperaturedifference outside its range.The pyroelectric infrared sensor detects a temperaturedifference between an object and its surroundings in about 5m (16.4 feet) detection range (about 30 ° horizontally andabout 85 ° vertically ). Therefore, the smaller the temperaturedifference is, the shorter the detection range gets. If there isno temperature difference, the pyroelectric infrared sensormay not detect anything. On the other hand, if there is a largetemperature difference, the detection range gets longer.• The pyroelectric infrared sensor is dirty.Clean the pyroelectric infrared sensor with a soft cloth.