Panasonic BT-LH1760W Operating Instructions Manual

Also see for BT-LH1500p: Operating instructions Operating instructions

12The screen displays eight types of information: input signal status, picture adjusting knob status, sharpness display,FUNCTION display, audio level meter display, menu display, time code display and closed caption display.1. The selected input line (J page 9, )• VIDEO, SDI1, SDI2,YPBP R/RGB-VIDEO/RGB-COMP.DVI-VIDEO/DVI-COMP.2. Signal format• Use “STATUS DISPLAY” in the “SYSTEM CONFIG”menu to set the display status (J page 22).• “UNSUPPORT SIGNAL” appears if an unsupportedsignal is input. It may also indicate that the formatselected in the “INPUT SELECT” menu does notmatch the input signal.• “NO SIGNAL” appears if no signal is input.3. Various indications (PIXEL TO PIXEL mode)• This indicates the PIXEL TO PIXEL mode isengaged.4. Various indications (FILM mode)• This indicates that “GAMMA SELECT” is set to“FILM.”5. Various indications (lock status)• This indicates that the control lock is on.Note:“UNSUPPORT SIGNAL” and “NO SIGNAL” may not beproperly displayed.Picture adjusting knob (J page 9, )• Press or turn this knob to make adjustments.• The status display appears when the knob ispressed. To clear the display, press the knob againor leave it idle for 10 seconds.• Only adjustments that appear on the screen can beadjusted.• The display always appears in the same screenlocation.Display status:PHASE, CHROMA, BRIGHT, CONTRAST or BACKLIGHT.Note:The status of the volume knob does not appear on thescreen.• This is the SHARPNESS H/V mode display.• It disappears after 2 minutes of inaction.Input signal statusPicture adjusting knob statusSharpness displayHow to Use the On Screen Menu