23Underlined values indicate factory defaults.*1 Changes in settings change menu settings.FUNCTIONSub menuSettingsDescriptionFUNCTION 1 -FUNCTION 5HV DELAYAUTOSETUPBLUE ONLYGAMMA SELECTSD ASPECTSCANSUB WINDOWWFM/VECTORMARKERPIXEL TO PIXELPIXEL POSITIONLEVEL METERCROSS HATCHMONOTIME CODECLOSEDCAPTIONUNDEF(Factory default:FUNCTION1:MARKERFUNCTION2:WFM/VECTORFUNCTION3:PIXEL TO PIXELFUNCTION4:TIME CODEFUNCTION5:LEVEL METER)Selects functions to be assigned to [FUNCTION1] - [FUNCTION5](front panel buttons).Displays synchronizing signals (horizontal, vertical).The display changes in the following order.DELAY OFFJV DELAYJH DELAYJHV DELAYJDELAY OFFPerforms auto setup for PC display.Cuts the red and green signals. Use this function to check phase andchroma. This button toggles between ON and OFF.*1Displays the gamma curve.The display changes in the following order.GAMMA STANDARDJGAMMA FILMJGAMMA STDIO/PSTJGAMMA STANDARDSwitches between “16:9” and “4:3.”*1Switches between “UNDER SCAN” and “NORMAL SCAN”.*1Sets the split-screen function.*1The display changes in the following order.SINGLEJFULL/PARTJSTILLJSINGLEDisplays waveform or vector display.Turns the marker on and off.Turns the PIXEL TO PIXEL function On and Off.Positions the display of signals in PIXEL TO PIXEL mode.Turns the LEVEL METER display On and Off.Turns the time code display on and off.Switches between color and monochrome.Turns the closed caption display on and off.UndefinedFUNCTIONDISPLAYOFFON1ON2Selects display of functions assigned to [FUNCTION1] -[FUNCTION5] (front panel buttons). It also selects button action (1-touch, 2-touch, off).1-touch action to display and perform functions.2-touch action to display and perform functions.No function display.Main Menu(continued)