Panasonic BT-LH1800p Operating Instructions Manual

Also see for BT-LH1500p: Operating instructions Operating instructions

Contents

10_ GPI hard specification8 inputs (refer to D-SUB 9-pin terminal)_ ON/OFF operationEach terminal of REMOTE operates its assigned function accord-ing to the setting with GND (Pin 5) shorted (ON) or opened (OFF)._ How to assign the function to each terminalThe assignment to each terminal can be freely executed bythe On Screen Menu.(Refer to “How To Use On Screen Menu”.)ContentsGPI 1–GPI 4GNDGPI 5–GPI 8Pin No.Pin 1–Pin 4Pin 5Pin 6–Pin 9[REMOTE CONFIG]>GPI1 UNDEFGPI2 UNDEFGPI3 UNDEFGPI4 UNDEFGPI5 UNDEFGPI6 UNDEFGPI7 UNDEFGPI8 UNDEFREMOTE CONFIG menuGPI1GPI5MARKER 1GPI1GPI5MARKER 1123456789REMOTE Specifications_ Priority order of each function• When MARKER 1 and MARKER 2 are simultaneously turnedON, the priority is given to MARKER 1.• 4:3/13:9/14:9 MARKER is displayed only when 16:9 is dis-played. 95%/93%/88%/80% MARKER is automaticallychanged in size according to 4:3 and 16:9 display.• When MARKER HALF and MARKER BLACK are simulta-neously turned ON, the priority is given to BLACK.• In case same setting is assigned to a plurality of terminals,ON operation continues until all terminals turn OFF. (Leveloperation terminal only)Ex.) Operation with GPI1 and GPI5 set to MARKER 1:• In case of edge operation terminal, the priority is given to theterminal turned ON later.• In case the operation is impossible, REMOTE terminal willnot operate. (Refer to the example below.)1) 4:3/13:9/14:9 MARKER display in 4:3 display.2) HD ZOOM selection in case of a signal other than 1080I,1035I, 720P signal.3) SD aspect selection in case of HD.4) INPUT OP selection when option unit is not installed.* 1) Operating conditionsLevel operation: It operates only while GPI terminal is shorted toGND.Edge operation: It operates at edge of the fall when shorted toGND.* 2) MARKER displayed by PRESET 1 and PRESET 2 is the one se-lected by the menu for MARKER setting. (It is set by [MARKER]-[GPI]PRESET 1 and PRESET 2 in the menu.)* 3) MARKER HALF and MARKER BLACK are effective only when4:3/13:9/14:9 MARKER is displayed by using MARKER 1 andMARKER 2.(For the detail, refer to the “Description of MARKER.”)All initialstates areundefined(UNDEF).FunctionUndefined (terminal assignmentnot defined)ON/OFF of marker selected byPRESET1*2)ON/OFF of marker selected byPRESET2*2)Background of marker beingdisplayed is set to HALF.Background of marker beingdisplayed is set to BLACK.Input system is changed to A.Input system is changed to B.Input system is changed to S.Input system is changed toOPTION.Display change in SD,16:9 (ON)/4:3 (OFF)Display change in HD (1080I,1035I, 720P), 4:3 (ON) enlarged/16:9 (OFF)Brightness of backlight is set tominimum.[List of Assigning Functions]Assignment itemsUNDEFMARKER1 ON/OFFMARKER2 ON/OFFMARKER HALFMARKER BLACKINPUT SEL. AINPUT SEL. BINPUT SEL. SINPUT SEL. OPSD ASPECTHD ZOOMBACKLIGHT OFFOperatingconditions* 1)––––Level operationLevel operationLevel operationLevel operationEdge operationEdge operationEdge operationEdge operationLevel operationLevel operationLevel operation