Panasonic BT-LH1800p Operating Instructions Manual

Also see for BT-LH1500p: Operating instructions Operating instructions

Contents

8With INPUT SELECT selected, the following menu will ap-pear.LINE A, B/S-VIDEOUsed to set the input format of LINE A, B/S-VIDEO.Set-value (underlined is default value)AUTO NTSC PALNON-STANDARDUsed to display a signal not in conformity with the broadcast-ing standard in selection of LINE A, LINE B, S-VIDEO.Set-value (underlined is default value)OFF ONREMOTE CONFIG[REMOTE CONFIG]>GPI1 UNDEFGPI2 UNDEFGPI3 UNDEFGPI4 UNDEFGPI5 UNDEFGPI6 UNDEFGPI7 UNDEFGPI8 UNDEFREMOTE CONFIG menuINPUT SELECT[INPUT SELECT]>[LINE A,B/S-VIDEO] AUTONON-STANDARD OFFINPUT SELECT menu[INPUT SELECT]>[LINE A,B/S-VIDEO] AUTONON-STANDARD OFF[HD-SDI] AUTOINPUT SELECT HD-SDI menuWith REMOTE CONFIG selected, the following menu willappear.GPI1–GPI8Used to set the pin assignment of REMOTE control terminal.The settable items are same for each terminal.For each function of set-value, refer to the “REMOTE specifi-cations.”Set-value (underlined is default value)UNDEFMARKER1 ON/OFFMARKER2 ON/OFFMARKER HALF*1)MARKER BLACK*1)INPUT SEL AINPUT SEL BINPUT SEL SINPUT SEL OPSD ASPECT*2)HD ZOOM*3)BACKLIGHT OFF* 1) MARKER HALF and MARKER BLACK are effective only whenMARKER1 and MARKER2 are used with 4:3/13:9/14:9 displayed.* 2) When using SD ASPECT, set SD ASPECT to REMOTE by VIDEOCONFIG menu.* 3) When using HD ZOOM, set HD ZOOM to REMOTE by VIDEOCONFIG menu. HD ZOOM is effective only in case of 1080I, 1035I,720P signal input.HD-SDIUsed to set the input format of HD-SDI.Set-value (underlined is default value)AUTO 1080/60I*1) 1080/50I1080/24psF*2) 1035/60I*1)720/60P*3)* 1) 1080/60I and 1035/60I are different with respect to the displaysize and the matrix used.Select 1080/60I and 1035/60I even in case of 1080/59.94I and1035/59.94I signal input.The status will be correctly displayed on the screen.* 2) Select 1080/24psF even in case of 1080/23.98psF signal input.The status will be correctly displayed on the screen.* 3) Select 720/60P even in case of 720/59.94P signal input.The status will be correctly displayed on the screen.Menu for option unit is further added for eachtype of option unit fitted on the rear panel._ HD SDI input unit installed [BT-YA300P]How To Use On Screen Menu