5Power switchThis is the main power switch.When the power is ON, the LED (green) above theswitch lights.12 INPUT selector buttonThis is used to select the signal input, and each time it ispressed, the input is switched in the following sequence:LINE A > LINE B > CMPNT> SDI > LINE A.The SDI signal input can be selected only when the BT-YA210G, available as an optional accessory, is installed.5 MENU selector buttonsThese are used to display the menus and perform theadjustments and settings.MENU/EXIT: Press this button to exit the menudisplay and menu. Further, if this buttonis pressed after the menu item has beenselected, the menu will be exited withthe item entered.WWXX: Press these buttons to move the cursorup or down or to select menu items.ENTER: Press this button to select menu items orenter settings.43BLUE ONLY buttonThe chroma and phase can be adjusted more accuratelyusing SMPTE color bars when this button is pressed.SCAN buttonUNDER SCAN: At this setting, signals in the videosignal standard area can be viewed.OVER SCAN: This setting provides overscanning ofaround 8% so that about 85% of thevideo signal standard area isdisplayed.Overscanning displays are used by consumer productsalthough their scanning ratio differs from product toproduct.6 Volume controlsThe volume level is altered by pressing the up (W) anddown (X) buttons.8 Tally lampThe lamp (red) lights due to remote control operation.See “REMOTE specifications” (page 10) for details.Parts and their functions (front panel)POWER INPUT SCAN BLUE MENU/EXIT ENTERMENU VOLUME1 234 5 678IntroductionThe BT-LS1400 commercial-use LCD video monitor features a 14 v-type LCD screen, a slim and lightweight design, and awide angle of view. Its connectors support not only standard NTSC signal input but S-Video, 480i , P component signal inputand SD SDI (optional) input as well.∫ Wide angle of viewBy using an LCD screen with a wide angle of view,exceptional image visibility is assured across wide angleranges in both the top-bottom and left-right directions.∫ Color temperature, gamma correctionThe color temperature complies with the D65 and D93standards while gamma correction is set to the 2.2 curve.∫ Mode settingsUsers can choose between three modes: the image pro-duction mode (BROADCAST), the general user image-receiving mode (GENERAL), and the user setting mode(USER).∫ FunctionsThis monitor is equipped with a blue-only function foradjusting the hue, and an underscanning function for dis-playing the whole screen.∫ REMOTE connectorThis enables parallel remote input control which in turnmakes it possible to select functions.7 Speaker
