Panasonic BT-LS1400 Operating Instructions Manual

Also see for BTLS1400 - 14" LCD MONITOR: Brochure & specs

Contents

8[PICTURE MENU]MODE BROADCASTCONTRAST 60BRIGHT 30CHROMA 30PHASE 30SHARPNESS 30AI OFFNR OFFCOLOR TEMP D933D Y/C OFF[LORD FACTORY]MODEThe video mode is selected here.≥ BROADCASTThis mode is set at the factory to best suit broadcastoperations.≥ GENERALThis mode applies the dynamic settings which were setat the factory for generally receiving images.≥ USERThis mode enables the mode set by the user to beestablished. BROADCAST is the factory setting.CONTRASTThe contrast can be adjusted here in line with the conditionsof the indoor work environment.BRIGHTThe black level can be adjusted here.CHROMAThe chroma level can be adjusted here.Use the blue-only function to adjust the level while viewingthe SMPTE color bars.PHASEThe phase can be adjusted here.Use the blue-only function to adjust the level while viewingthe SMPTE color bars.SHARPNESSThe appropriate sharpness in line with the signalcharacteristics can be set here.AIDynamic images can be received when this is set to ON.NRThis is set to ON when the signal-to-noise ratio for the videosignals received is problematic.COLOR TMPThe color temperature can be adjusted here.The color temperature is adjusted to comply with the D65and D93 standards at the factory.For consumer products, the color temperature is normallyset higher.3D Y/CThis is for the 3-dimensional Y/C separation function.The picture quality is different when the function is ON andwhen it is OFF.LOAD FACTORYThis is selected when the factory settings are to be restored.¥ PICTURE menuThe menu items shown below appear when the PICTURE menu is selected on the main menu.How to use the on-screen menusWhen any changes are made to the settings on this menu, the changes also take effect for the settings of other linkedvideo signals for some of the video signals which have been selected. How the changes are linked is explained below.≥ Any changes made to the settings when the LINE A signal has been selected will also be made to the LINE Bsignal. Conversely, any changes made to the settings when the LINE B signal has been selected will also be madeto the LINE A signal.≥ When the optional SDI input unit (BT-YA210G) is installed, any changes made to the settings when the CMPNT480i signal is selected will also be made to the SDI signal. Conversely, any changes made to the settings when theSDI signal is selected will also be made to the CMPNT 480i signal.