Panasonic BTLH2550E - LCD VIDEO MONITOR Operating Instructions Manual

Also see for BTLH2550E - LCD VIDEO MONITOR: Operating instructions

32Underlined values indicate factory defaults.*1 Changes in settings change menu settings.FUNCTIONSub menu Settings DescriptionFUNCTION 1 -FUNCTION 5 HV DELAYAUTOSETUPBLUE ONLYGAMMA SELECTCOLOR SPACESD ASPECTSCANTWO WINDOWSUB INPUT SEL.WFM/VECTORMARKERLEVEL METERCROSS HATCHMONOTIME CODECLOSEDCAPTIONANAMOUNDEF(Factory default:FUNCTION1:MARKERFUNCTION2:WFM/VECTORFUNCTION3:TWO WINDOWFUNCTION4:TIME CODEFUNCTION5:LEVEL METER)Selects functions to be assigned to [FUNCTION1] - [FUNCTION5](front panel buttons).Displays synchronizing signals (horizontal, vertical).The display changes in the following order.DELAY OFF J H DELAY J V DELAY J HV DELAY J DELAY OFFPerforms auto setup for PC display.Cuts the red and green signals. Use this function to check phase andchroma. This button toggles between ON and OFF.*1Displays the gamma curve.The display changes in the following order.GAMMA STANDARD J GAMMA FILM J GAMMA STDIO/PST JGAMMA STANDARDSets the color space. The display changes in the following order.EBU J ITU-709 J WIDE1 J WIDE2 J WIDE3 J SMPTE-C J EBUSwitches between “16:9” and “4:3.” *1Switches between “UNDER SCAN” and “NORMAL SCAN”. *1Sets the split-screen function. *1The display changes in the following order.• When the input signal terminals of video displayed in the sub-windowand main window differSINGLE MAIN J TWO (L/S, M/M, S/L) J SINGLE SUB J SINGLEMAIN• When video from the same input signal terminal is displayed in thesub-window and main windowSINGLE MAIN J TWO(L/S, M/M, S/L) J STILL J SINGLE SUB JSINGLE MAINSwitches sub-window inputs in split screen mode.Displays waveform or vector display.Turns the marker on and off.Turns the LEVEL METER display On and Off.Turns the time code display on and off.Switches between color and monochrome.Turns the closed caption display on and off.Turns ANAMO On and Off.UndefinedFUNCTIONDISPLAY OFFON1ON2Selects display of functions assigned to [FUNCTION1] -[FUNCTION5] (front panel buttons). It also selects button action (1-touch, 2-touch, off).1-touch action to display and perform functions.2-touch action to display and perform functions.No function display.Main Menu (continued)