Panasonic BTLH80W - 7.9" MONITOR Operating Instructions Manual

Also see for BT-LH80WE: Parts list

29INPUT SELECTThe underlined values are factory preset setting values.Sub menu Settings ExplanationYPB PR ONOFFUsed to set the YPBPR line to the INPUT SELECT button.∗1COMPONENTLEVELSMPTEB75B00Used to select the input level for the YP BPR (component) signal. When the signal level specified in SMPTE is Chroma 100IRE, PB, PR =0.7Vp-p Select this when connecting a betacam or similar deviceswith a 7.5 IRE setup level. Select this when connecting a betacam or similar deviceswith a 0 IRE setup level.VF ONOFFUsed to set the VF line to the INPUT SELECT button.∗1VIDEO/YPB PR VIDEOYPB PRUsed to select the VF input mode.

PR > Selects the YPBPR (component) signal.SIGNAL TYPE HDSDUsed to select the signal output from the camera. Selects the HD signal. Selects the SD signal.VIDEO ONOFFUsed to set the VIDEO line to the INPUT SELECT button.∗1FORMAT AUTONTSCPALUsed to select the format for VIDEO input.∗2 NTSC or PAL is selected automatically. NTSC PALNTSC SETUP 0075Used to set the setup level for NTSC.<75> Select this when the signal is at a 7.5 IRE setup level.<00> Select this when the signal is at a 0 IRE setup level.SDI ONOFFUsed to set the SDI line to the INPUT SELECT button.∗1∗3∗1 When an SDI input unit (option) is installed, it is not possible to switch OFF all the 4 input lines. An OFF settingcannot be made for the 4th input line.When there is no SDI input unit (option), it is not possible to switch OFF all the following 3 input lines: YP B PR ,VIDEO or VF. An OFF setting cannot be made for the 3rd input line.∗2 Although the factory preset setting is AUTO, we recommend specifying a format because there is a risk of theinput signal being affected by external noise.∗3 When there is no SDI input unit (option), the SDI item is displayed in gray and cannot be set.Main Menu (continued)