Panasonic BTLH80W - 7.9" MONITOR Operating Instructions Manual

Also see for BT-LH80WE: Parts list

9Supplying the powerAn Anton/Bauer or V-mount type of battery pack or an external DC power supply can be used to power thismonitor.Using the Anton/Bauer type battery pack1. Install the Anton/Bauer type of battery pack.Battery pack2. Insert the battery pack and slide it in the directionof the arrow.ReleaseleverTo remove the battery pack, slide it in the oppositedirection to the one in which it was attached whilekeeping the release lever on the battery holder pulleddown all the way.Using a V-mount type battery packCAUTION:These servicing instructions are for use by qualifiedservice personnel only. To reduce the risk of electricshock, do not perform any servicing other than thatcontained in the operating instructions unless youare qualified to do so.1. Remove the battery holder.Battery holder2. Install the accessory battery mount terminal block.Battery mount terminalblock3. Fix the V-mount type battery holder with four screws(length 8 mm (5/16 inch)) supplied with the holder,and then fasten the two screws on the terminalsection.V-mount typebattery holderThis connectoris not used.