Panasonic C7301U Operating Instructions Manual

Also see for C7301U - Cd Rcvr W/ Custm Dsply: Installation insrtuctions

Contents

Panasonic C7301U Operating Instructions Manual Manual pdf 19 page image

CQ-C8401U/C8301U/C7401U/C7301UCustomize the Display (Customize Function)You can edit the moving images and still images that are initially stored in the unit. You also can use the data that is downloaded fromthe Panasonic Web site and the data that is stored with a digital camera or other devices and processed with exclusive software,IMAGE STUDIO. See “Notes on Customize function” (a page 38) as well.Note: Visit Panasonic Web site (http://panasonic.co.jp/pas/en/software/customize/index.html) for details.CUSTOMIZE Menu Display36Display SettingAdjustment to display on the DISPLAY menuCQ-C8401U/C8301U/C7401U/C7301U 37 EnglishDisplay Setting, Customize the Display (Customize Function)Preparation:Put the CD-R/RW that contains data tobe customized in hand.1 If there is a disc inside, take out thedisc.2 Press [SRC] toselect the CDmode.3 Hold down [SEL] for 4 sec. or more todisplay the menu screen.4 Load a CD-R/RW that contains data.Note:¡ It may take time for the unit to identify the CD-R/RW.¡ Discs recorded by the packet writing software arenot supported.5 Select an item to be customized.[}][{]: Select[BAND] (SET): ConfirmNote: To exit the customize menu, hold down[SEL] 4 sec. or more.GRAPHIC PATTERNMoving image (graphic pattern) data (a page 36)STILL IMAGEStill image data (a page 36)OPENING MESSAGEMoving image at power on (a page 14)CLOSING MESSAGEMoving image at power off (a page 14)6 Select a file.[}][{][]][[]:Select[BAND] (SET): ConfirmNotes:¡ Files are automatically identified by their exten-sions, and target files are displayed.¡ If ”BACK” is selected, the screen of step 5appears.7 For a moving image file or still imagefile, select where to save the file.[]][[]: Select[BAND] (SET): ConfirmNotes:¡ New data overwrites existing data.¡ If “BACK” is selected, the screen of step 6appears.8 Confirm the changed item.[]][[]: Select[BAND] (SET): ConfirmCustomization is performed. Do not turn off thepower in mid-operation. (It takes approx. 1 minutesto complete this operation for a 168 kB movingimage.) After completion of this operation, thescreen of step 5 appears.Note: If “NO” is selected, the screen of step 5appears.9 Hold down [SEL] 4 sec. or more.The CD mode comes back. Press the [OPEN] but-ton to eject the disc.DISPLAY Menu Display1 Press [MENU] to display the menudisplay.For using the remotecontrol, hold down[SEL] (MENU) for 2sec. or more.2 Press []] or [[] to display theDISPLAY menu.3 Press [}] or [{] to select a function tobe adjusted.4 Press [BAND](SET) to confirmthe display.5 Adjust the setting value.6 Press [BAND] (SET).7 Press [MENU] to confirm theadjustment.For using the remote control, hold down [SEL](MENU) for 2 sec. or more.CQ-C8401UCQ-C8401UGRAPHIC PATTERN(Setting range: 6 types, Default: All)Switching by []] or [[]All: Sequential display from pattern A to D.Pattern A-DS.A.: 19-band display (Spectrum analyzer)STILL IMAGE(Setting range: 11types, Default: All)Switching by []] or [[]All: Sequential display from pattern 1 to 10No.1-10CONTRAST(Setting range: 1 to 5, Default: Contrast 3)[[]: Tilting up view angle[]]: Tilting down view angleCLOCK ADJNote: Adjust the clock when “ADJUST” appears on thedisplay.[[]: Adjusting minutes[]]: Adjusting hours[}]: Forward[{]: BackwardNotes:¡ The graphic pattern and still image are changeable.(a page 37)¡ If corrupted data is selected, “DISPLAY FILE INCOM-PLETE” appears. (a page 38)SRCSRC