9-19 Disassembly/ReassemblyNote:Power off the computer. Do not shut down to the Suspend or hibernation mode.Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result.9.1. Disassembly Instructions9.1.1. PreparationBe sure to make the following preparations before disassem-bling.ï Shut down Windows and turn off the power.ï Disconnect the AC adaptor.ï Remove other devices if they are connected.Attention:ï Please execute writing BIOS ID when you exchange theMain Board.ï Parts (Sheet and rubber) etc. related various the ConductiveCloth and Heat Spreader cannot be recycled. Use new parts.9.1.2. Removing the Battery Pack1. Open the hand strap cover.2. Remove the hand strap.3. Slide the Battery cover latch.4. Open and remove the Battery cover.5. Pull the tab of the Battery Pack and remove it from thewireless display.6. Attach the hand strap.7. Close the hand strap cover.9.1.3. Removing the Display Unit1. Remove the two Screws and the Antenna Cover L.2. Remove the two Screws and the Antenna Cover R.hand strap coverhand strapbattery cover latchbattery coverbattery packwireless displayhand straphand strap coverAntennaCover LRear CabinetAntennaCover R