Panasonic CF-18 Series Reference Manual

Also see for Toughbook CF-18 Series: Precautions for Installing Precautions for Installing Operating instructions Supplementary instructions Supplementary instructions

101Dealing with Problems (Advanced) Disk OperationsCannot read/write to a floppy disk z Are you using the Panasonic CF-VFDU03 USB floppy disk drive (optional)?z Has the floppy disk been correctly inserted?z Has the floppy disk been correctly formatted?z Your floppy disk content may be corrupted.Unable to write to a disk z Is the floppy disk write-protected?How to format a floppy disk is unclear z Format the floppy disk using the following procedure.Select [My Computer] in [start] and select [3 1/2 Floppy (A:)], then select [File]from the menu and select [Format].Unable to read/write to the hard disk z Your drive or file may not have been properly set.z Check to see if the hard disk is full. If it is full, delete unnecessary files.z Your hard disk content may be corrupted. Contact Panasonic TechnicalSupport.When the previous item is not thecausez Try testing another drive or media. Touch Pad / DigitizerThe cursor cannot be controlledproperlyz If you are using an external mouse, ensure that the external mouse has beenconnected correctly.z Restart the computer by using the keyboard.(Press , U, and select [Restart] with R.)z If the computer does not respond to keyboard commands, read "No response"(Î page 103).The cursor does not move in scrollingarea of the touch pad z When the Microsoft ® IntelliMouse™ Wheel mode or the original mode is set forthe touch pad, only scroll operations are possible for the right part or bottompart of the touch pad. In this case, cursor operations are possible by using thework surface excluding the right part or bottom part. When no mode is set, theentire surface of the touch pad can be used for cursor operations.Unable to input using the touch pad z Has the Setup Utility been used to set [Touch Pad] to [Enable]?z When external mouse drivers are installed (e.g., IntelliMouse), the touch padmay not be used.z Has the touch pad driver been properly installed?