7 Self Diagnosis Test7-1As for the self-diagnosis test(PC-Diagnostic utility) to use this model, a standard test and theenhancing test by the module of the main body building in are possible.NotesTo skip BIOS passwordUse + key to skip BIOS password or authentication of fingerprint.This key is only for entering DIAG mode. Not available to boot the computer.If customer set "HDD Lock", the DIAG program cannot perform HDD test.*This key is for service purpose only. Do not disclose this information to unrelated others.1. Beginning of self-diagnosis test1-1. Setting of content of setup1.The power supply of the computer is turned on.2." F2 " is pushed on the screen of "Panasonic" while " press " is displayed.3.The setup utility starts and then takes notes of the content of the BIOS setup of present set.4." F9 " is pushed, " Yes" is selected on the screen of " Is the default value loaded? ", and " Enter"is pushed.5." F10 " is pushed.6." Yes" is selected on the screen of the setup confirmation, and " Enter" is pushed.7.The computer starts automatically.AttentionIf the device which can be set is set to "Invalidity" by "Advanced" or "Security" menu, becomes anerror by "PC-Diagnostic utility".(It is judged that the device which can be set to "Invalidity" by "Main" menu such as "Flat pad" isnormal if the controller operates normally though sets to "Invalidity" by the setup. )In the model with built-in DVD of the USB connection, even if DVD is normal, becomes an error iflegacy USB is set to "Invalidity"1-2. When you execute an automatic test1."Ctrl" + "F7" is pushed while the "Panasonic" start screen is displayed after the computer is started.2. The test of all devices begins automatically by "PC-Diagnostic utility" 's starting.AttentionIt is a test which the customer who bought PC can execute. (As for HDD, the enhancing test is alsopossible.)A flat pad does not work for a while after starting "PC-Diagnostic utility".The movement of a flat pad might become abnormal If after RAM begins from the CPU/Systemtest, a flat pad will be operated in about 30 seconds. In that case,restarts pushing"Alt" + "Ctrl" +"Del" key. Or, please start "PC-Diagnostic utility" again after doing the power supply switch in theslide, and turning off the power supply.1-3. When you execute the enhancing test1. Please let me discontinue diagnosing clicking to end an automatic test.2. Please click on the character of "D" "PC-Diagnostic utility" on the screen while pushing both of right"Shift" and left "Shift" keys.3. All devices which can select the enhancing test make the setting of the enhancing test possible.4. The district device is made"FULL" display (enhancing test).5. The test begins clicking .*Please refer to item 4 for the error result of each test and the division of the breakdown part.
