2-2Right sideA B C D FE G H I1394J K M N O PLHQRRear side BottomA: Hard Disk DriveReference Manual “Hard Disk Drive”B: SD Memory Card SlotReference Manual “SD Memory Card”C: SD Memory Card Indicator(Blinking: During access)Reference Manual “SD Memory Card”D: IEEE 1394 Interface ConnectorReference Manual “IEEE 1394 Devices”E: Smart Card SlotReference Manual “Smart Card”F: Modem PortReference Manual “Modem”G: LAN PortReference Manual “LAN”H: USB PortReference Manual “USB Devices”I: DC-IN JackJ: Security LockA Kensington cable can be connected.For further information, read the manual that comeswith the cable.K: Ext Antenna ConnectorL: Expansion Bus ConnectorReference Manual “Port Replicator”M: External Display PortReference Manual “External Display”N: Headphone JackYou can connect headphones or amplified speakers.When they are connected, audio from the internalspeakers is not heard.O: Microphone JackA condenser microphone can be used. If other typesof microphones are used, audio input may not be pos-sible, or malfunctions may occur as a result.When recording in stereo using a stereo micro-phone:Click [start] - [All Programs] - [SoundMAX] - [Con-trol Panel] and select [Microphone], and then adda check mark for [No Filtering] in [Microphone En-hancements].• When using a monaural microphone with a 2-termi-nal plug:Click [start] - [All Programs] - [SoundMAX] - [Con-trol Panel] and select [Microphone], and then adda check mark for [Voice Recording] in [MicrophoneEnhancements].Otherwise, only audio on the left track will be record-ed.P: Serial PortQ: RAM Module SlotReference Manual “RAM Module”R: SpeakerReference Manual “Key Combinations”