10First-time Operation2 Connect your computer to a power outletA Slide the cover. Slide the cover to the arrow direction and then open the cover.B Connect your computer to a power outlet.The battery charging starts automatically.CAUTIONl Do not disconnect the AC adaptor until the first-time operation procedure is completed.l When using the computer for the first time, do not connect any peripheral device (including wired LAN cable)except the battery pack and AC adaptor.l Handling the AC adaptorProblems such as sudden voltage drops may arise during periods of thunder and lightning. Since this couldadversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless runningfrom the battery pack alone.l When the DC plug is not connected to the computer, disconnect the AC cord from your electrical outlet. Poweris consumed simply by having the AC adaptor plugged into an electrical outlet.122211223 Open the displayA Pull out the handle.l If you do not pull out the handle before opening the display, the computer may fall over due to theweight of the display.B Rotate the latch (D) to the arrow direction.C Hold the dents with both hands, and lift the display slightly.D Hold the side of the computer with either of your hands and then lift up the display to open.CAUTIONl Do not open the display wider than necessary (180° or more), and do not apply excessive pressure to theLCD. Do not open or close the computer holding the edge of the LCD segment.334D12
