114 Turn on the computerPress and hold the power switch until the power indicator lights.CAUTIONl Do not press the power switch repeatedly.l The computer will be forcibly turned off if you press and hold the power switch for four seconds or longer.l Do not perform the following operation until the First-time Operation is completed. Touching the release lever (E) and detach lock (F) Detaching the tablet from keyboard base Connecting or disconnecting the AC adaptor Pressing the power switch Closing the display Any changes from the default setting of the Setup Utilityl Once you turn off the computer, wait for ten seconds or more before you turn on the computer again.l When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Waituntil the computer cools down, and then turn the power on again. If the computer does not power on evenafter cooling down, contact Panasonic Technical Support (è “OPERATING INSTRUCTIONS - ReferenceManual”).5Select language and OS (32-bit or 64-bit).CAUTIONl Carefully choose your language because you cannot change it later. If you set a wrong language, you need toreinstall Windows.A Select language and OS (32bit or 64bit) on “Select OS” screen and click [OK].The language setting will start by clicking [OK] on the confirmation screen.The language and OS setting will be completed in about 15 minutes.B When termination screen is displayed, click [OK] to turn off the computer.C Turn on the computer.6 Setup WindowsSelect language and click [Next].Follow the on-screen instructions.l The computer restarts several times. Do not touch the touchscreen, external keyboard or externalmouse, and wait until the drive indicator has turned off.l After the computer is turned on, the screen remains black or unchanged for a while, but this is not amalfunction. Wait for a moment until the Windows setup screen appears.l During setup of Windows, use the touchpad and clicking to move the pointer and to click an item.l Setup of Windows will take approximately 5 minutes / 20 minutes.Go to the next step, confirming each message on the display.l You can set the Wireless Network after the setup of Windows is complete.If “Let’s get connected” is displayed, you can select [Skip this step].“Join a wireless network” screen may not appear.l We recommend that you set the password after the setup of Windows in complete.l Follow the steps below.A When “Enable sensors” is displayed, click [Enable this sensor].B When the [User Account Control] screen is displayed, click [Yes].C At the [Display Rotation Tool] confirmation screen, click[Yes].The computer restarts automatically, and the setting is enabled.CAUTIONl You can change the user name, image and security setting after setup of Windows.l Use standard characters as a computer name: numbers 0 through 9, uppercase and lowercase letters from A toZ, and the hyphen (-) character. Do not use the following words and characters for user name: CON, PRN, AUX,CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, LPT, &, space, @.If the error message “The computer name is not valid” appears, check if characters other than the above arenot entered. If the error message still remains on the display, set the key entry mode to English (“ENG”) andenter characters.lIn particular, if you create a user name (account name) that includes the “@” mark, a password will berequested at the log-on screen, even if no password has been set. If you try to log on without entering apassword, “The user name or password is incorrect.” may be displayed and you will not be able to log on toWindows (è “OPERATING INSTRUCTIONS - Reference Manual”).EF44
