Panasonic CF-72 Series Reference Manual

Also see for ToughBook CF-72 Series: Supplementary instructions Reference manual Operating instructions Operating instructions Operating instructions

47USB Devices Windows 98 Windows 2000For more detailed information, refer to the operation manual of the USB de-vice.You may need to install drivers compatible with the OS you are using for yourUSB devices. Follow the on-screen instructions and refer to the operationmanual for USB devices on how to install the driver.When USB device is connected, there are cases the standby or hibernationfunction will not operate in a normal manner due to the USB device. In addi-tion, USB devices may have to be removed temporarily and the computerrestarted in cases where the computer is unable to start up properly.NOTE1 Power off your computer ( "Starting Up/Shutting Down")Do not shut down using the standby or hibernation mode.USB PortsUSB devices are not supported.NOTEWindows NTInstalling USB Devices2 Connect the USB device to your computerRemoving USB DevicesCAUTIONDo not remove USB devices while your computer is in the standby or hiberna-tion mode.2 Remove the USB device1 Select on the task tray and select the USB device, thenpress [Stop]Follow the on-screen instructions.(When removing a USB device after turning off the computer, this step is notneed.)Windows 2000Before connecting a USB device, change the multimedia pocket device inaccordance with the media in which the driver of the USB device exists.Once a screen to install a driver is displayed, the multimedia pocket devicecannot be recognized even if it is properly installed.NOTE