58Setup UtilityPower Management Mode: [Enable (Always)]HDD Motor Timeout: 2 minECO Mode Timeout: 2 minPower Switch: [Off]Fn+F7/Fn+F10 Key: [Enable]CD Drive Speed: [High]Power MenuParameters ( : Default)Power Management Mode* 1HDD Motor Timeout* 1ECO Mode Timeout* 1Power Switch* 1Hibernation Timeout* 1 * 3Standby Timeout* 1* 3Fn+F7/Fn+F10 KeyCD Drive Speed* 4DisableEnable (Battery)Enable (Always)Automatically set through setting of PowerManagement Mode (2 min / Never)Automatically set through setting of PowerManagement Mode (2 min / Never)StandbyHibernation* 2OffNever4 min16 minDisableEnableHighLow*1 Does not operate for Windows 98 orWindows 2000. The actual opera-tion is set on Windows.*2 On Windows 98 or Windows NT, thisis not displayed when a hibernation-specific partition is not secured. Re-install the OS to secure a partitionby using the Product Recovery CD-ROM.On Windows 2000, this item is notdisplayed.*3 Not displayed when [Power Switch]is set to [Off].Windows NTSince access to the hard disk oc-curs often on Windows NT, standby/hibernation timeout may not functionaccording to the set times.*4 The description for “CD DriveSpeed” applies to the DVD-ROMdrive.Power Management Modes Windows NTNeverNeverDisable2 min2 minDisableHDD Motor TimeoutECO Mode TimeoutPower Conservation(AC Adaptor Connected)Enable (Always)(Setting at the time of purchase)Power ManagementModeFunctionsautomatically setDisable2 min2 minEnableEnable(Battery)When Windows 98 or Windows 2000 is starting up, the individual timeout functions of the Setup Utility will not work.