Panasonic CF-C1 Series Reference Manual

Also see for CF-C1 Series: Supplementary instructions Operating instructions Operating instructions Reference manual Reference manual

173Hardware DiagnosticsNOTEz Only for the hard disk, keyboard and touch pad, you can select standard diagnostic check or extended diagnosticcheck.When the PC-Diagnostic Utility starts up, it will run the standard diagnostic check.z We recommend that you use the touch pad for operations. When not using the touch pad, you can operate using theinternal keyboard instead. Note, however, that the touch pad and internal keyboard may not function temporarily duringdiagnostic check. If this happens, wait for a moment before operating them.z If the touch pad does not operate properly, press Ctrl + Alt + Del to restart the computer, or press the power switch toturn the power off, and then restart the PC-Diagnostic Utility.Run this utility using the default settings in the Setup Utility.If the Setup Utility or other settings will not allow hardware to be executed, the hardware icon will be displayed in gray.1 Connect the AC adaptor, and turn on the wireless switch (Î page 122).During the diagnostic check, do not remove the AC adaptor, or attach any peripheral devices.2 Turn on or restart the computer, and press F2 or Del while [Panasonic] boot screen is displayed.The Setup Utility starts up.z If the password is requested, enter the Supervisor Password.z If you are using the computer after changing the settings from the status at the time of purchase, we recommendthat you make a note of the settings that are changed.3 Press F9.At the confirmation message, select [Yes] and press Enter.Regarding the PC-Diagnostic UtilityOperations Touch pad operations Internal keyboard operationsSelect icon Place the cursor above the icon Press Space, and then press Î  ÏÐ ( (close) cannot be selected)Click the icon Tap or click (right click cannot be used) Press Space above the iconComplete the PC-DiagnosticsUtility and then restart thecomputerClick (close) Press Ctrl + Alt + DelRunning the Diagnostic Check