CQ-4330U12Cassette Tape PlayerLOUDOLSEL/SATUSHASS/TREBL/FADERMUTESCANILL65 SKP4 REP3 TPS2 NR1 MTLDISC CD SCAN RPT RDMCQ-4330UDISPMODEExposed Tape sideLoading a CassetteInsert the cassette with the exposed tape side facingto the right. Gently push the cassette in until theloading begins. The cassette will be loaded in placeand playback starts.Ejecting the TapePress [u] and the cassette will eject for removal, and theprevious mode of operation will be resumed.Notes:• If power is switched off before [u] is pressed, the cassettewill not eject. Switch on the power again and press [u] toeject the cassette.• The cassette tape should always be removed from thecassette slot when not in use.Play Side ChangePress [] to switch to the program on the other side ofthe tape.The display changes to indicate which program isplaying.Cassette Head Cleaning Warning• The display will show “CLN HEAD” to remind you to cleanthe cassette head after accumulating 100 hours tapeplaying.• Press and hold [] for more than 2 seconds to clear the“CLN HEAD” display and the TAPE mode display willresume. (It is valid only in TAPE mode.)Rewind and Fast ForwardPress [1 TRACK] or [2 TRACK] to activate rewind orfast forward of the tape.Program IndicatorNote: To maintain your cassette player in topcondition, avoid using tapes that are longer than90 minutes (C-90).Notes on Cassette TapesTape Slack:Use a pencil or similar object to take up theslack as shown. If a loose tape is used, this mayresult in the tape becoming tangled in therotating parts of the unit.Do not touchor pull outthe tape.PencilExposed end(Open end)Caution: Do not insert a tape when “tape”indicator “” or “” lights.Top Side PlayingBottom Side PlayingProgram Indicator Program IndicatorPress [] to stop rewind or fast forward.If you rewind the tape fully, it will play on the same programside again.If you fast forward to the end, play will resume from thebeginning of the other side of the tape.