CQ-4330U29Specifications❐ GeneralPower Supply: 12 V DC (11 V-16 V) test Voltage 14.4 V, Negative groundCurrent consumption: Less than 2.5 A (tape mode, 0.5 W 4-speaker)Maximum Power Output: 37 W × 4 channels at 400 Hz, Volume Control maximumTone adjustment range:Bass: ± 12 dB at 100 HzTreble: ± 12 dB at 10 kHzPower Output: 18 W per channel into 4 ohms, 40 to 30 000 Hz at 3 % THDSuitable Speaker Impedance: 4-8 ΩDimensions (W × H × D): 7" × 1-15/16" × 6-1/10" (178 × 50 × 160 mm)Weight: 3 lbs. 12 oz (1.7k )❐ FM Stereo RadioFrequency Range: 87.9-107.9 MHzUseable Sensitivity: 12 dBf. (1.1 μV/ 75 Ω, S/N 30 dB)50 dB Quieting Sensitivity: 17 dBf. (1.8 μV/ 75 Ω)Frequency Response: 30-15 000 Hz ±3 dBAlternate Channel Selectivity: 75 dBStereo Separation: 35 dB at 1 kHzSignal/Noise Ratio: 70 dB (Mono)❐ AM RadioFrequency range: 530 kHz–1 710 kHzUsable sensitivity: 28 dB/μV (25 μV, S/N 20 dB)❐ Weather Band RadioFrequency Range: 162.40-162.55 MHzUseable Sensitivity: 3 dB/μV (S/N 20 dB)Signal/Noise Ratio (40 dB/μV): 50 dB❐ Tape PlayerReproduction System: 4-track, 2-program stereoTape Speed: 1-7/8"/sec (4.76 cm/sec)FF/REW Time: Less than 110 sec (C-60)Frequency Response: 35-14 000 Hz ±3 dBWow and Flutter: 0.12 % (WRMS)signal/Noise Ratio: 52 dB (Dolby NR on: 62 dB)Above specifications comply with EIA standards.Note: Specifications and design are subject to modification without notice due to improvements in technology.Dobly noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.“DOLBY” and the double-D symbol A are trademarks of Dolby Laboratories Licensing Corporation.