CQ-4330U8Alarm Time SettingLOUDVOLSEL/SATPUSHBASS/TREBBAL/FADERMUTESCANTUNESEEKILL65 SKP4 REP3 TPS2 NR1 MTLDISC CD SCAN RPT RDMCQ-4330UCLKALMAPM DISPBAND MODEPWRALMTUNESEEKThe 12-hour system is used for the clock.Initial Alarm TimePress and hold [ALM] (Alarm)“AM 12:00” is displayed when the alarm is not adjusted.[}] (Minutes)[{] (Hours)Alarm Time SettingHoursMinutesAlarm Time ResetWhen you want to reset the alarm time, repeatsteps q to r.Alarm Operation• Alarm is switched to ON or OFF each time [ALM] is pressed.• When the alarm is switched to ON, the alarm will sound at the setalarm time.Turning off the Alarm SoundThe alarm will turn off automatically after 90 seconds. Otherwise,press [ALM] once.Alarm output Volume SelectionYou can select ALARM VOL 1 (or VOL 2) by pressing [ALM] insequence and the display will show as follows.q Press and hold [ALM] (Alarm) and do notrelease to set alarm time. Display blinks andthe alarm time setting mode is activated.w Press [{] to set the hour.e Press [}] to set the minute.r Once the alarm time has been set, release[ALM].Note: Press and hold [{] or [}] to changenumbers rapidly.(blink.)(Hours set.)(Minutes set.)Cautions:• Be careful not to set wrong alarm time, otherwise, the alarmmay sound while driving.• If the alarm is set, be sure to check the set alarm time bypressing [CLK].• If volume is set at “0” level, the output volume will be muted.(Even when ALARM is acting.)a a OFF