Panasonic CQ-C1401U Service Manual

Also see for CQC1301U - AUTO RADIO/CD DECK: Operating instructions Operating instructions Installation instructions

Contents

1 ABOUT LEAD FREESOLDER (PbF)Distinction of PbF PCB:PCBs (manufactured) using lead free solder will have a PbFstamp on the PCB.Caution :•••• Pb free solder has a higher melting point than standardsolder; Typically the melting point is 50 - 70°F (30 -40°C) higher. Please use a soldering iron withtemperature control and adjust it to 700 ± 20°F (370 ±10°C). In case of using high temperature soldering iron,please be careful not to heat too long.•••• Pb free solder will tend to splash when heated too high(about 1100°F/600°C)•••• This lead free solder will be used for the products afterserial No. 1,000,001.2 LASER PRODUCTS3 FEATUERS•••• Digital servo for reliable playback.•••• PLL (Phase Locked Loop) synthesized tuning.•••• 18-FM, 6-AM presets with preset scan.•••• Removable face plate.•••• MP3/WMA Playback from CD-R/RW.•••• CD Changer Control. (CQ-C1401U)•••• The following table describes the differences between2 models4 REPLACING THE FUSEUse fuses of the same specified rating (15amps). Usingdifferent substitutes or fuses with higher ratings, or connectingthe product directly without a fuse, could cause fire or damageto the stereo unit.5 MAINTENANCEYour product is designed and manufactured to ensure aminimum of maintenance. Use a dry, a soft cloth for routineexterior cleaning. Never use benzine, thinner or other solvents.6 NOTES[RADIO BLOCK]Do not align the AM/FM package block. When the packageblock is necessary, it will be supplied already aligned at thefactory.[CD DECK BLOCK]This model has no servo alignment points becausemicrocomputer controls the servo circuit.7 DIMENSIONS3CQ-C1401U / CQ-C1301U