Panasonic CQ-C8100N Operating Instructions Manual

Contents

Panasonic CQ-C8100N Operating Instructions Manual Manual pdf 16 page image

Function SettingAdjustment to display on the FUNCTION menuAudio Setting, Function Setting EnglishFUNCTION Menu display3130Audio SettingAdjustment to each speaker and an optional subwooferMain volume adjustment(Setting range: 0 to 40, Default: 18)q : Upw : DownBass adjustment(Setting range: -12 to +12, 2 dB Step, Default: Bass 0)q : Upw : DownTreble adjustment(Setting range: -12 to +12, 2 dB Step, Default: Treble 0)q : Upw : DownBalance adjustment(Setting range: L15 to R15 and Centre, Default: Centre)q : Right enhancedw : Left enhancedFader adjustment(Setting range: R15 to F15 and Centre, Default: Centre)q : Front enhancedw : Rear enhancedSubwoofer level adjustment(Setting range : mute (-∞), -6 to +6, 2 dB Step, Default: 0)q : Upw : DownSubwoofer Low Pass Filter(Setting range: 80 Hz, 120 Hz, 160 Hz, Default 80Hz)q : Upw : DownHigh Pass Filter(Setting range: Filter OFF, 90 Hz, 135 Hz, 180 Hz, 225 Hz,Default: Filter OFF)q : Upw : DownSQ preset change(Adjustable frequency: 60, 160, 400, 1 k, 3 k, 6 k, 16 k (Hz),Setting range: –12 dB to +12 dB, 2 dB Step) (a page 13)q : Upw : Down[[]: Higher frequency[]]: Lower frequencySubwoofer output rangeOther speakers output rangesAUDIO Menu display1 Press [VOLUME](SEL: Select) todisplay the menudisplay.2 Press [VOLUME] (SEL: Select) to selecta mode to be adjusted.3 Turn [VOLUME](Volume) clock-wise or counter-clockwise toadjust.Note: If no operation takes place for more than 5 sec-onds in the audio menu (2 sec. in Main volume adjust-ment and 10 sec. in the SQ preset change operation), thedisplay returns to the regular mode.1 Press [MENU] to display the menu dis-play.For using the remotecontrol, hold down[MENU] for 2 sec. ormore.2 Press []] or [[] to display the FUNC-TION menu.3 Press [}] or [{] to select a function tobe adjusted.4 Press [BAND](SET) to adjust.5 Press [MENU] to confirm the adjust-ment.For using the remote control, hold down [MENU]for 2 sec. or more.MUTE KEYSetting [MUTE] buttons’ functions: Volume off (Default): Volume down by 10 stepsEXT.MUTE (External Mute)Volume adjustment when an interruption such as carnavigation signal occurs: Volume off (Default): Volume down by 15 steps: Volume down by 10 steps: No change in volumeSECURITYSetting the security function (a page 9): ON (Default): OFFACCSetting depending on your car: ACC not equipped (Default): ACC equippedCQ-C8300NBANDCQ-C8300NBANDBANDCaution:Be sure to select OFF when your car has noACC position in the ignition switch. Failureto do this could cause the battery to godead.(External muting display)