CQ-C9800N/C9700NEnglishPower onPress [SOURCE] (PWR).Notes:¡ The opening screen appears. You can overwrite theopening screen with new one. (a page 34)¡ The demonstration message appears for first use. (apage 8)Power offHold down [SOURCE] (PWR) until youhear a beep, then release it.Note: The ending screen appears at ACC on setting. Youcan overwrite the ending screen with new one. (a page34)10GeneralThis chapter explains how to turn on or off the power, how to adjust the volume, etc.CQ-C9800N/C9700N 11You can remove the faceplate to prevent it frombeing stolen.Removing1 Turn off the power (a page 10)2 Press [ ] (Release).(The face plate disen-gages with a clickwhen it is removed.)The front panel automatically closes in 5 seconds ifit is open or tilted.The power is automatically turned off while the unitis active.3 Put the faceplate in the case.Mounting1 Slide the left side of the removable faceplate in place.2 Press the right end of removable faceplate until “click” is heard.Press it until you hear a click.Cautions:¡ It is recommended to remove or mount the faceplate when the plate is at the closed position.Do not remove or mount the plate when the plate isin motion.¡ This face plate is not waterproof. Do not expose it towater or excessive moisture.¡ Do not remove the face plate while driving your car.¡ Do not place the face plate on the dashboard ornearby areas where the temperature rises to highlevels.¡ Do not touch the contacts on the face plate or on themain unit, since this may result in poor electricalcontacts.¡ If dirt or other foreign substances get on the con-tacts, wipe them off with clean and dry cloth.¡ To avoid damaging the front panel, do not push itdown or place objects on it while it is open.Open/EjectPress [ ] (OPEN).When a disc is already loaded, the disc will automaticallybe ejected.ClosePress [ ] (OPEN).TiltThe display angle changes among 4 levels as followsevery time you hold down [ ] (TILT) for 1 sec. ormore and release.Note: The last selectedangle is maintained evenafter turning off the power.Notes:¡ The volume level can be set independently for eachsource. (For radio, one volume setting for AM, onevolume setting for all FMs)¡ The volume is not adjustable while an error display ison the monitor. (a page 40)q Upw DownSetting Range: 0 to 40Default: 18Volume off (down)Press [MUTE].CancelPress [MUTE] again.Note: Volume-down range can be specified. (a page32)GeneralPower On/off(PWR: Power)Front Panel Motion (Open/Close, Tilt)(OPEN/CLOSE, TILT)Volume Adjustment(VOLUME)Temporary Volume Off (Down)MUTE (ATT: Attenuation)Cautions:¡ To avoid damaging the front panel, do not push itdown or place objects on it while it is open.¡ Do not pinch your finger or hand in the front panel.¡ Do not insert foreign objects into the disc slots.¡ For the following cases, the front panel automati-cally closes. Use caution not to catch your finger.¡ After a lapse of 20 seconds¡ When a disc is inserted¡ When the face plate is removed (a page 10)TILT 1TILT 2TILT 3OPENFace Plate Removing/Mounting(Anti-Theft System)CQ-C9800NBANDCQ-C9800NBANDCQ-C9800NBANDCQ-C9800NBAND