Panasonic CQ-DFX972N Operating Instructions Manual

9CQ-DFX972N6ENGLISHUp to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.Manual PresetMemoryManually save a station inthe preset memory.Select a band and frequency (step w and e on the previous page)q Press and hold [}] or [{] for more than 2 seconds until the presetnumber blinks.w Press [}] or [{] to select a preset number.e Press and hold [}] or [{] for more than 2 seconds to memorize.The display blinks once, and a receivingstation is saved in the memory.Notes:¡Frequency setting can be performed even after selecting a preset number.¡To suspend preset write, press [DISP].Entering numbers directly from the remote controlSelect a band and frequency (step w and e on the previous page)Press and hold one of the preset button from [1] to [6] on the remote controlfor more than 2 seconds.Auto PresetMemoryAutomatically save stationswith good reception in thepreset memory.¡The 6 stations with good reception will be automatically saved in thememory under preset numbers 1 to 6.¡Once set, the preset stations are sequentially scanned for 5 seconds each.¡To stop the scanning, press [}] or [{].(Pressing one of the preset button from [1] to [6] on the remote controlalso can stop the scanning.)Note: Only RDS stations will be saved at default setting (AF ON). To select nonRDS stations too, set AF OFF. (a Page 11)Preset StationCallingSelect a band (step w on the previous page)Press [}] or [{] to select the preset number for tuning in the preset station.Press one of the preset button from [1] to [6] on the remote control.Note: New stations are overwritten on existing saved stations after following this procedure.Entering numbers directly from the remote controlStation PresetScanningSearchingSelect a band (step w on the previous page)Press and hold [BAND] for more than2 seconds.