Panasonic CQ-VAD9200U Operating Instructions Manual

Also see for CQVAD9200U - CAR A/V DVD NAV: Operating instructions

Panasonic CQ-VAD9200U Operating Instructions Manual Manual pdf 87 page image

91CQ-VAD9200U82ENGLISHNo sound on thespeaker.No sound from thesubwooferTrouble Cause / StepThe brightness of thescreen is not stable.This is a characteristic of liquid crystal panels and is not a problem.The screen is not adjusted properly.aMake every adjustment of the screen.“AUTO” dimmer is selected.aSelect one of the dimmer levels from among 1 to 4 to make the dimmeradjustment become free from light intensity.The picture is dark.The picture is whitish.Something is wrongwith the picture. Thepicture is light in color.Red, blue, or greenspots appears.■ Display SettingsTrouble Cause / StepA disc without subwoofer channel is played back, or analog audio is playedback¡Subwoofer is set to “NO” in the speaker setting.aSet subwoofer to “ YES”.¡Sound field is set to “OFF” or “VOCAL”.aNo technical trouble. Set it to other than “OFF” or “VOCAL”.¡A disc recorded on 1 ch, 3 ch, 4 ch, or 5 ch is played back.aNo technical trouble. No audio is output from the subwoofer when sucha disc is played back.Playing back a disc having a subwoofer channel¡Subwoofer is set to “NO” in the speaker setting.aSet subwoofer to “ YES”.¡Down mixaNo technical trouble. Cancel the down mix.¡Private mode is set to “ON”.aSet private mode to “ OFF”.The speaker setting is “NO” or “NONE”.aSet it correctly.The speaker leads are connected in reverse between right and left.aConnect the speaker wires to the correct one.Cables are not correctly connected.aConnect the cables correctly.No sound from left,right, front, or rearspeaker.■ Sound SettingsLeft and right soundsare reversed.